Equivalent & Substitute Parts: PV18-38R-C

Part Overview

The Panduit Corp PV18-38R-C is an insulated ring terminal connector designed for 18-22 AWG wire gauges with a 3/8 inch stud connection. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and system maintenance. Ring terminal connectors serve as termination points for electrical conductors in applications requiring secure, permanent connections to studs or tabs. The obsolete status of the PV18-38R-C requires substitution with active product alternatives that maintain electrical and mechanical compatibility.

Substiute Parts

PV18-38R-C

Panduit CorpIn Stock: 987PV18-38R-C Datasheet

Current PartRFQ

2-34152-2

TE Connectivity AMP ConnectorsIn Stock: 68612-34152-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV18-38R-C is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• Terminal type must be circular
• Stud size must be 3/8 inch
• Wire gauge range must accommodate 18-22 AWG minimum
• Termination method must be crimp
• Contact material must be copper with tin finish
• Insulation must be present
• Mounting configuration must be free hanging (in-line)

The TE Connectivity AMP Connectors part number 2-34152-2 satisfies these criteria. This substitute accepts wire gauges from 16-22 AWG, which encompasses the 18-22 AWG range of the original part. Physical dimensions remain within acceptable tolerance ranges for stud-mounted applications. Both parts utilize copper conductors with tin plating and insulated construction suitable for identical circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 2-34152-2 is the qualified substitute for the obsolete Panduit PV18-38R-C based on the following engineering factors:

Electrical Compatibility: Both parts utilize identical contact materials (copper with tin finish) and support the same wire gauge range for the intended application. The 16-22 AWG capability of the substitute encompasses the original 18-22 AWG specification.

Mechanical Compatibility: Stud size, mounting configuration, and overall dimensions are equivalent between the two parts. Thickness and width measurements differ by less than 0.002 inches and 0.001 inches respectively, which are within acceptable mechanical tolerances for stud-mounted terminal applications.

Compliance Status: The substitute part carries ROHS3 compliance certification, meeting current regulatory requirements. The original part's RoHS status is not applicable due to its obsolete classification. The substitute's active product status ensures continued availability and supply chain reliability.

Packaging Consideration: The substitute is supplied in Cut Tape (CT) packaging, which differs from the original part's unspecified packaging. This packaging format is standard for terminal components and does not affect functional performance.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 2-34152-2 directly replace the Panduit PV18-38R-C in existing applications?

A: Yes. Both parts share identical stud sizes, terminal types, contact materials, and mounting configurations. The substitute's wire gauge range (16-22 AWG) encompasses the original specification (18-22 AWG). Mechanical dimensions are equivalent within standard tolerances.

Q: What is the significance of the wire gauge difference (16-22 AWG vs. 18-22 AWG)?

A: The substitute accepts a broader wire gauge range that includes the original specification. This means the substitute can terminate 18-22 AWG conductors as required, with the additional capability to accommodate 16-17 AWG wire if needed in future applications.

Q: Does the difference in insulation material affect compatibility?

A: Both parts are insulated. The original uses vinyl insulation while the substitute uses PVC. Both materials provide equivalent electrical insulation properties for the intended application. The insulation diameter specifications are compatible with standard stud mounting practices.

Q: Why is the substitute's product status important?

A: The original part is obsolete, meaning Panduit no longer manufactures or supports it. The substitute's active status ensures ongoing availability, technical support, and compliance with current industry standards. Active products receive manufacturing updates and quality assurance consistent with current regulations.

Q: Are there packaging implications when switching to the substitute?

A: The substitute is supplied in Cut Tape (CT) packaging rather than the original's unspecified format. Cut Tape packaging is standard for terminal components and is compatible with automated assembly processes. No functional differences result from this packaging change.

Q: What compliance certifications does the substitute carry?

A: The TE Connectivity 2-34152-2 is ROHS3 compliant and carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. These certifications meet current regulatory requirements for electronic component procurement.