PV14-8LFX-M Equivalent & Substitute Parts

Part Overview

The PV14-8LFX-M is a blue insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 14-16 AWG wire to an 8 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent alternatives for continued procurement and system maintenance. The part belongs to the Pan-Term® series of terminal connectors and maintains full RoHS3 compliance and REACH unaffected status.

Substiute Parts

PV14-8LFX-M

Panduit CorpIn Stock: 2090PV14-8LFX-M Datasheet

Current PartRFQ

P14-8LF-M

Panduit CorpIn Stock: 2503P14-8LF-M Datasheet

MFR RecommendedRFQ

PV14-8LF-M

Panduit CorpIn Stock: 8028PV14-8LF-M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PV14-8LFX-M is determined by the following critical parameters:

Mandatory Matching Parameters:

• Stud/Tab Size: 8 Stud
• Wire Gauge: 14-16 AWG
• Termination Method: Crimp
• Terminal Type: Spring, Snap
• Contact Material: Copper
• Contact Finish: Tin
• Insulation Type: Insulated
• Color: Blue
• Manufacturer: Panduit Corp

Compliance Parameters:

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8536.90.4000

Two active substitute parts meet these criteria and are available from Panduit Corp inventory. Both maintain identical electrical and mechanical compatibility with the obsolete PV14-8LFX-M while offering improved availability and active product status.

Parameter Comparison

Engineering Selection Recommendations

PV14-8LF-M is the primary recommended substitute for the obsolete PV14-8LFX-M. This part maintains identical insulation type (insulated vinyl), color (blue), and overall electrical characteristics while offering active product status and superior inventory availability (7922 units in stock). The overall length differential of 0.040" (1.01mm) represents a negligible variation within standard mechanical tolerances for spade terminal applications. This part is the direct functional equivalent and should be selected for new designs and replacement procurement.

P14-8LF-M is an alternative substitute that maintains all critical electrical parameters and active product status. However, this part is non-insulated, which represents a functional difference from the insulated PV14-8LFX-M. Selection of P14-8LF-M is appropriate only in applications where insulation is not required or where the non-insulated configuration is compatible with the circuit design. The shorter overall length (0.770" versus 1.010") may also present mechanical constraints in certain mounting configurations.

Both substitute parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory compatibility with the original component.

Frequently Asked Questions (FAQ)

Q: Can PV14-8LF-M be used as a direct replacement for PV14-8LFX-M?

A: Yes. PV14-8LF-M is a direct functional equivalent. Both parts are insulated blue spade terminals with 8 stud configuration, 14-16 AWG wire gauge, crimp termination, and identical contact materials and finishes. The overall length difference of 0.040" (1.01mm) falls within standard mechanical tolerances for spade terminal applications and does not affect electrical performance or stud compatibility.

Q: What is the key difference between P14-8LF-M and PV14-8LF-M?

A: The primary difference is insulation. P14-8LF-M is non-insulated, while PV14-8LF-M is insulated with blue vinyl. Both maintain identical stud size, wire gauge, and electrical characteristics. Selection depends on application requirements for insulation. Additionally, P14-8LF-M has a shorter overall length (0.770" versus 0.970"), which may affect mechanical fit in certain assemblies.

Q: Are there any compliance differences between the main part and substitute parts?

A: No. All three parts (PV14-8LFX-M, P14-8LF-M, and PV14-8LF-M) maintain identical RoHS3 compliance, REACH unaffected status, ECCN classification (EAR99), and HTSUS code (8536.90.4000).

Q: Why is PV14-8LFX-M obsolete if substitutes are available?

A: Product obsolescence reflects manufacturer discontinuation decisions and is independent of technical performance. The availability of active substitutes ensures continued system support and procurement capability. PV14-8LF-M represents the current active production equivalent.

Q: Can I use these parts interchangeably in existing assemblies?

A: PV14-8LF-M is fully interchangeable with PV14-8LFX-M for all electrical and mechanical functions. P14-8LF-M is electrically compatible but requires confirmation that the non-insulated configuration is acceptable for the specific application. The minor length variations do not affect stud compatibility or electrical performance.

Q: What inventory considerations should guide part selection?

A: PV14-8LF-M offers the highest current inventory (7922 units), followed by P14-8LF-M (2416 units). For applications requiring insulated terminals, PV14-8LF-M provides superior availability and is the recommended selection. The remaining stock of obsolete PV14-8LFX-M (1993 units) should be reserved for legacy system maintenance only.