PV14-5SLF-C Equivalent & Substitute Parts

Part Overview

The PV14-5SLF-C is a blue insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 14-16 AWG wire. This component features a 5 stud configuration and is part of the Pan-Term® series. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and support ongoing applications requiring this terminal type.

Substiute Parts

PV14-5SLF-C

Panduit CorpIn Stock: 742PV14-5SLF-C Datasheet

Current PartRFQ

PV14-6LF-C

Panduit CorpIn Stock: 1201PV14-6LF-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV14-5SLF-C is determined by compatibility across the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute maintain 14-16 AWG wire gauge capacity, ensuring equivalent current-carrying capability and termination interface.

Termination Method: Crimp termination is consistent across all parts, maintaining assembly process compatibility.

Insulation and Color: Blue vinyl insulation is maintained, supporting circuit identification and environmental protection requirements.

Contact Material and Finish: Copper with tin finish is preserved, ensuring electrical conductivity and corrosion resistance specifications.

Terminal Type and Mounting: Spring, snap terminal type with free hanging in-line mounting is maintained across substitutes.

Series Consistency: All parts belong to the Pan-Term® series, confirming design family alignment.

The primary distinction between the main part and substitute is the stud size configuration (5 stud versus 6 stud) and associated dimensional variations, which determine mounting compatibility with specific equipment or connector housings.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The PV14-5SLF-C is classified as obsolete, while the PV14-6LF-C is active. For new designs or ongoing production requiring spade terminal connectors in the 14-16 AWG range, the PV14-6LF-C provides continued manufacturer support and availability.

Compliance and Certifications: The PV14-6LF-C holds ROHS3 compliance, whereas the main part lists RoHS status as not applicable. Both parts maintain REACH unaffected status and EAR99 export classification, supporting regulatory requirements across standard applications.

Dimensional Compatibility: Selection between these parts depends on the mounting interface. The 5 stud configuration of the main part accommodates specific connector housings or equipment designed for that stud size. The 6 stud substitute is suitable for applications where the larger stud diameter and increased tongue opening (0.140" versus 0.120") are compatible with the receiving connector or terminal block.

Electrical Equivalence: Both parts maintain identical wire gauge capacity (14-16 AWG), contact material (copper), and contact finish (tin), ensuring equivalent electrical performance in circuits where the mechanical stud size difference does not present a constraint.

Frequently Asked Questions (FAQ)

Q: Can the PV14-6LF-C directly replace the PV14-5SLF-C in all applications?

A: Direct replacement depends on the receiving connector or terminal block design. The primary difference is the stud size (5 versus 6) and associated dimensional variations. The substitute is compatible only where the equipment or connector housing is designed to accept a 6 stud terminal. Verify the receiving component specifications before substitution.

Q: What is the significance of the stud size difference?

A: Stud size determines the mechanical fit within connector housings and terminal blocks. A 5 stud terminal fits into receptacles designed for 5 stud studs, while a 6 stud terminal requires a 6 stud receptacle. Using an incorrect stud size results in improper seating and potential electrical or mechanical failure.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts support 14-16 AWG wire gauge, feature copper contacts with tin finish, and utilize crimp termination. Electrical performance in circuits is equivalent when the mechanical stud size is compatible with the receiving connector.

Q: What is the difference in tongue inside opening between these parts?

A: The PV14-5SLF-C has a tongue inside opening of 0.120" (3.05mm), while the PV14-6LF-C has 0.140" (3.56mm). This dimension affects the fit on the stud or tab of the receiving connector. The larger opening on the 6 stud part accommodates the larger stud diameter.

Q: Does the PV14-6LF-C have any additional features?

A: The PV14-6LF-C includes a brazed seam feature in addition to serrated termination, whereas the main part lists only serrated termination. The brazed seam provides additional structural integrity at the connection point.

Q: Is the PV14-6LF-C available in the same packaging as the main part?

A: The PV14-6LF-C is supplied in bulk packaging, while the main part packaging is not specified in available data. Confirm packaging requirements with the supplier based on assembly and inventory needs.

Q: What compliance certifications apply to the substitute part?

A: The PV14-6LF-C is ROHS3 compliant and maintains REACH unaffected status. Both parts are classified as EAR99 for export purposes and share the same HTSUS code (8536.90.4000).