PV10-8SLF-L Equivalent & Substitute Parts

Part Overview

The PV10-8SLF-L is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire to an 8 stud. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing applications. The part features serrated termination, tin contact finish, and copper contact material with vinyl insulation suitable for free-hanging in-line mounting configurations.

Substiute Parts

PV10-8SLF-L

Panduit CorpIn Stock: 862PV10-8SLF-L Datasheet

Current PartRFQ

PV10-8LF-L

Panduit CorpIn Stock: 1362PV10-8LF-L Datasheet

SimilarRFQ

53244-4

TE Connectivity AMP ConnectorsIn Stock: 926753244-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV10-8SLF-L is determined by the following critical parameters: stud size (8 stud), terminal type (spring/snap), wire gauge compatibility (10-12 AWG), termination method (crimp), and mounting configuration (free-hanging in-line). The contact material, contact finish, and insulation material must remain consistent with the original specification to maintain electrical and mechanical performance.

Two substitute parts have been identified based on these criteria:

PV10-8LF-L (Panduit Corp): Maintains identical electrical and mechanical specifications with the exception of packaging format and overall dimensions. This part is active status and ROHS3 compliant.

53244-4 (TE Connectivity AMP Connectors): Shares the 8 stud configuration and spring/snap terminal type but operates within a different wire gauge range (14-16 AWG) and uses brass contact material instead of copper. This part is active status and RoHS compliant.

Parameter Comparison

Engineering Selection Recommendations

PV10-8LF-L is the primary equivalent substitute for the PV10-8SLF-L. This part maintains identical wire gauge specification (10-12 AWG), contact material (copper), and insulation composition (vinyl). The part is active status and ROHS3 compliant, providing regulatory compliance for new designs. Dimensional variations exist in width and overall length; however, the critical functional parameters remain aligned with the original specification.

53244-4 is a secondary substitute option with significant parameter deviations. This part operates within a different wire gauge range (14-16 AWG versus 10-12 AWG) and uses brass contact material instead of copper. Selection of this part requires confirmation that the application wire gauge and contact material specifications can accommodate these differences. The part is active status and RoHS compliant.

Frequently Asked Questions (FAQ)

Q: Can PV10-8LF-L directly replace PV10-8SLF-L in all applications?

A: PV10-8LF-L maintains the same wire gauge (10-12 AWG), stud size (8 stud), contact material (copper), and insulation type (vinyl). The primary differences are packaging format and minor dimensional variations in width and overall length. Direct replacement is supported for applications where these dimensional tolerances are acceptable.

Q: What are the key differences between PV10-8LF-L and 53244-4?

A: PV10-8LF-L is designed for 10-12 AWG wire with copper contacts, while 53244-4 is designed for 14-16 AWG wire with brass contacts. These differences affect wire termination compatibility and electrical performance. Selection between these parts depends on the specific wire gauge and contact material requirements of the application.

Q: Why is the wire gauge specification critical for substitution?

A: Wire gauge determines the crimp termination force, contact pressure, and overall electrical performance of the connection. Using a terminal designed for a different wire gauge range results in improper termination and potential connection failure.

Q: What is the significance of contact material differences?

A: Copper and brass contacts exhibit different electrical conductivity and corrosion resistance characteristics. Contact material selection affects long-term reliability and performance in specific environmental conditions.

Q: Are there packaging considerations when selecting a substitute?

A: PV10-8SLF-L is supplied in standard packaging, while PV10-8LF-L is supplied in bulk packaging. 53244-4 is supplied in cut tape format. Packaging selection affects inventory management and component handling procedures but does not affect terminal functionality.

Q: What compliance certifications apply to these parts?

A: PV10-8LF-L is ROHS3 compliant. 53244-4 is RoHS compliant. The original PV10-8SLF-L has not applicable RoHS status due to obsolete classification. Compliance requirements for new applications should be evaluated against current regulatory standards.