PV10-8SLF-D Equivalent & Substitute Parts

Part Overview

The PV10-8SLF-D is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire onto an 8 stud. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing applications and new designs. The part features serrated termination, tin contact finish, and copper contact material with vinyl insulation suitable for free-hanging in-line mounting configurations.

Substiute Parts

PV10-8SLF-D

Panduit CorpIn Stock: 759PV10-8SLF-D Datasheet

Current PartRFQ

PV10-8LF-D

Panduit CorpIn Stock: 1825PV10-8LF-D Datasheet

SimilarRFQ

53244-4

TE Connectivity AMP ConnectorsIn Stock: 926753244-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV10-8SLF-D is determined by the following critical parameters: stud size (8 stud), terminal type (spring/snap), termination method (crimp), and mounting configuration (free-hanging in-line). Wire gauge compatibility, insulation material, contact material, and contact finish are secondary parameters that influence substitution viability.

The identified substitute parts are grouped as follows:

Primary Substitute (PV10-8LF-D): Maintains identical stud size, wire gauge range (10-12 AWG), terminal type, termination method, insulation material (vinyl), contact material (copper), and contact finish (tin). This part differs in packaging (bulk versus unspecified for main part) and product status (active versus obsolete). Dimensional variations exist in width and overall length.

Secondary Substitute (53244-4): Shares stud size (8 stud), terminal type (spring/snap), termination method (crimp), and mounting configuration. However, this part operates at a different wire gauge range (14-16 AWG versus 10-12 AWG), features different contact material (brass versus copper), and different insulation color (blue versus yellow). This part is suitable only when wire gauge requirements permit the 14-16 AWG specification.

Parameter Comparison

Engineering Selection Recommendations

PV10-8LF-D Selection: This substitute is the primary choice for direct replacement of the PV10-8SLF-D. Both parts maintain identical wire gauge specifications (10-12 AWG), contact material (copper), contact finish (tin), and insulation material (vinyl). The PV10-8LF-D carries active product status and ROHS3 compliance, providing assurance of continued availability and regulatory alignment. Dimensional differences in width (0.300" versus 0.290") and overall length (1.050" versus 0.920") require verification against mechanical constraints in the application. The part is available in bulk packaging with 1739 pieces in stock.

53244-4 Selection: This substitute is applicable only when wire gauge requirements can accommodate the 14-16 AWG specification. The part maintains 8 stud size, spring/snap terminal type, and crimp termination method. The contact material differs (brass versus copper), and insulation color differs (blue versus yellow). This part carries active product status and RoHS compliance. Selection of this part requires confirmation that the 14-16 AWG wire gauge is compatible with the circuit design and that brass contact material is acceptable for the application. The part is available in cut tape packaging with 9252 pieces in stock.

Frequently Asked Questions (FAQ)

Q: Can PV10-8LF-D directly replace PV10-8SLF-D in all applications?

A: PV10-8LF-D maintains the same wire gauge (10-12 AWG), stud size (8 stud), contact material (copper), and insulation material (vinyl) as the main part. Dimensional differences exist in width and overall length. Mechanical fit within the application assembly must be verified before substitution.

Q: What is the primary difference between PV10-8LF-D and PV10-8SLF-D?

A: The primary differences are product status (active versus obsolete), packaging type (bulk versus unspecified), and dimensions. The PV10-8LF-D is 0.130" longer overall and 0.010" wider than the main part.

Q: When is 53244-4 a suitable substitute?

A: The 53244-4 is suitable only when the application wire gauge requirement is 14-16 AWG. This part cannot be used in applications requiring 10-12 AWG termination. Additionally, the brass contact material and blue insulation color differ from the main part specifications.

Q: What are the compliance differences between the substitute parts?

A: PV10-8LF-D is ROHS3 compliant and REACH unaffected. The 53244-4 is RoHS compliant with vendor-undefined REACH status. Both parts carry EAR99 ECCN classification and identical HTSUS codes.

Q: Are there packaging considerations for these substitutes?

A: PV10-8LF-D is supplied in bulk packaging, while 53244-4 is supplied in cut tape packaging. Bulk packaging may require reel or tape conversion for automated assembly processes.

Q: What is the inventory availability for these substitutes?

A: PV10-8LF-D has 1739 pieces in stock. The 53244-4 has 9252 pieces in stock. The main part PV10-8SLF-D has 661 pieces in stock but is obsolete.