PV10-8LF-E Equivalent & Substitute Parts

Part Overview

The PV10-8LF-E is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire to an 8 stud. This component is classified as obsolete and has been superseded by active production alternatives. Identifying equivalent substitute parts is necessary to maintain design compatibility while ensuring access to current inventory and ongoing manufacturer support.

Substiute Parts

PV10-8LF-E

Panduit CorpIn Stock: 1147PV10-8LF-E Datasheet

Current PartRFQ

PV10-8LF-D

Panduit CorpIn Stock: 1825PV10-8LF-D Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV10-8LF-E is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications for wire gauge range, stud size, termination method, insulation properties, and contact characteristics. The PV10-8LF-D qualifies as a direct substitute because it matches all functional parameters of the main part while offering the advantage of active product status and current manufacturer availability.

The substitution logic is based on the following key parameters:

• Wire Gauge: 10-12 AWG (identical range required)
• Stud/Tab Size: 8 Stud (exact match required)
• Termination: Crimp (identical method required)
• Insulation: Insulated vinyl (identical specification required)
• Color: Yellow (identical specification required)
• Contact Material and Finish: Copper with tin plating (identical specification required)

Parameter Comparison

Engineering Selection Recommendations

The PV10-8LF-D is the direct equivalent substitute for the PV10-8LF-E. Both parts are manufactured by Panduit Corp within the Pan-Term® series and maintain identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: the PV10-8LF-E is obsolete, while the PV10-8LF-D is active production.

Selection of the PV10-8LF-D provides the following advantages:

• Active product status ensures ongoing manufacturer support and availability
• ROHS3 compliance maintained across both parts
• Identical dimensional and electrical specifications guarantee direct form, fit, and function compatibility
• Current inventory availability (1739 pcs in stock for PV10-8LF-D versus obsolete status for PV10-8LF-E)

Both parts carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8536.90.4000) and environmental compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the PV10-8LF-D be used as a direct replacement for the PV10-8LF-E?

A: Yes. The PV10-8LF-D is a direct equivalent substitute. All electrical and mechanical parameters are identical, including wire gauge, stud size, termination method, insulation properties, and contact specifications. The parts are functionally interchangeable.

Q: What is the difference between the PV10-8LF-E and PV10-8LF-D?

A: The primary difference is product status. The PV10-8LF-E is obsolete, while the PV10-8LF-D is an active production part. All technical specifications remain identical. The packaging differs (PV10-8LF-D is supplied in bulk), but this does not affect component performance or compatibility.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance status and carry the same regulatory classifications (ECCN: EAR99, HTSUS: 8536.90.4000). Environmental and regulatory requirements are equivalent.

Q: What wire gauge range does this terminal accommodate?

A: Both the PV10-8LF-E and PV10-8LF-D are rated for 10-12 AWG wire. This specification is identical across both parts and is a critical parameter for substitution compatibility.

Q: What stud size is required for these terminals?

A: Both parts are designed for an 8 stud connection. The stud/tab size is a fixed specification and must match exactly for proper mechanical and electrical connection.

Q: Is the termination method the same for both parts?

A: Yes. Both the PV10-8LF-E and PV10-8LF-D use crimp termination. The termination method is identical and is a critical parameter for assembly compatibility.

Q: What is the insulation material used in these terminals?

A: Both parts use vinyl insulation. The insulation diameter is 0.225" (5.72mm) for both the main part and substitute. The insulation material and dimensions are identical specifications.

Q: Can these terminals be used in applications requiring different wire gauges?

A: No. These terminals are specifically rated for 10-12 AWG wire. Use outside this range will result in improper termination and potential electrical or mechanical failure.