PV10-10SLF-L Equivalent & Substitute Parts

Part Overview

The PV10-10SLF-L is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire onto a #10 stud. This component is classified as obsolete, indicating discontinuation from active production. The part features a spring snap terminal type with serrated termination for secure wire attachment and tin-plated copper contact material. Due to its obsolete status, identification of equivalent substitute parts is necessary for ongoing maintenance, repair, and replacement applications where this connector is specified in existing designs or systems.

Substiute Parts

PV10-10SLF-L

Panduit CorpIn Stock: 892PV10-10SLF-L Datasheet

Current PartRFQ

PV10-10LF-L

Panduit CorpIn Stock: 1922PV10-10LF-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV10-10SLF-L is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Terminal Type: Spring, Snap
• Stud/Tab Size: #10 Stud
• Wire Gauge: 10-12 AWG
• Termination Method: Crimp
• Insulation: Insulated
• Color: Yellow
• Contact Material: Copper
• Contact Finish: Tin
• Material - Insulation: Vinyl
• Tongue Inside Opening: 0.190" (4.83mm)
• Insulation Diameter: 0.225" (5.72mm)

The substitute part PV10-10LF-L meets all mandatory matching parameters. Dimensional variations in outer width (0.330" vs. 0.340") and overall length (0.920" vs. 1.040") remain within acceptable tolerance ranges for the same stud size and wire gauge classification. The substitute part is manufactured by the same supplier (Panduit Corp) within the Pan-Term® series, ensuring design consistency and functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The PV10-10LF-L serves as the direct substitute for the obsolete PV10-10SLF-L. Selection of the substitute part is supported by the following factors:

Product Status: The PV10-10LF-L maintains active production status, ensuring availability for current and future procurement requirements. The main part PV10-10SLF-L is obsolete and no longer manufactured.

Regulatory Compliance: The substitute part PV10-10LF-L is ROHS3 compliant, meeting current environmental and material restriction standards. Both parts maintain REACH Unaffected status and share identical ECCN and HTSUS classifications, confirming equivalent regulatory treatment.

Functional Equivalence: All critical electrical and mechanical parameters match between the main part and substitute. The dimensional variations (width and length) are minor and do not affect functional performance for the specified wire gauge and stud size application.

Supply Chain Continuity: The substitute part is available in higher inventory quantities (1840 Pcs vs. 816 Pcs), supporting reliable supply for replacement and new applications.

Frequently Asked Questions (FAQ)

Q: Can PV10-10LF-L be used as a direct replacement for PV10-10SLF-L?

A: Yes. The PV10-10LF-L is functionally equivalent to the PV10-10SLF-L across all critical parameters including terminal type, stud size, wire gauge, termination method, insulation type, and contact material. Both parts are manufactured by Panduit Corp within the Pan-Term® series.

Q: What are the dimensional differences between these parts?

A: The PV10-10LF-L has a slightly larger outer width (0.340" vs. 0.330") and overall length (1.040" vs. 0.920"). These dimensional variations do not affect compatibility with #10 studs or 10-12 AWG wire termination.

Q: Why is the main part listed as obsolete?

A: The PV10-10SLF-L has been discontinued from active production by Panduit Corp. The PV10-10LF-L represents the current active equivalent within the Pan-Term® product line.

Q: Are there packaging differences between these parts?

A: The main part PV10-10SLF-L packaging is not specified in available documentation. The substitute part PV10-10LF-L is supplied in bulk packaging.

Q: Do both parts meet current environmental standards?

A: The substitute part PV10-10LF-L is ROHS3 compliant. The main part PV10-10SLF-L has RoHS status listed as not applicable due to its obsolete classification. Both parts maintain REACH Unaffected status.

Q: What is the wire gauge compatibility for these terminals?

A: Both parts are rated for 10-12 AWG wire gauge with crimp termination. The insulation diameter of 0.225" (5.72mm) and tongue inside opening of 0.190" (4.83mm) are identical across both parts.

Q: Are these parts suitable for the same applications?

A: Yes. Both parts function as yellow insulated spade terminals for #10 studs with identical electrical and mechanical characteristics. The substitute part is recommended for new designs and replacement applications due to its active production status and ROHS3 compliance.