PV10-10F-E Equivalent & Substitute Parts

Part Overview

The PV10-10F-E is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire to a #10 stud. This component is classified as obsolete, indicating that the original product is no longer in active production. Identifying equivalent and substitute parts is necessary to maintain supply chain continuity and ensure project completion when the original part number becomes unavailable.

Substiute Parts

PV10-10F-E

Panduit CorpIn Stock: 854PV10-10F-E Datasheet

Current PartRFQ

PV10-10F-L

Panduit CorpIn Stock: 1482PV10-10F-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV10-10F-E is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Electrical Parameters: Wire gauge range (10-12 AWG), stud size (#10), contact material (copper), and contact finish (tin) must be identical to ensure proper electrical conductivity and connection reliability.

Mechanical Parameters: Outer width (0.370"), overall length (1.040"), insulation diameter (0.225"), and tongue inside opening (0.200") must match to ensure physical compatibility with mating connectors and mounting hardware.

Material & Construction: Insulation type (vinyl), insulation status (insulated), termination method (crimp), and brazed seam construction must be preserved.

Compliance: RoHS3 compliance and REACH unaffected status must be maintained.

The substitute part PV10-10F-L meets all these criteria and is therefore a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The PV10-10F-L is the manufacturer-recommended substitute for the obsolete PV10-10F-E. Both parts are manufactured by Panduit Corp and share identical electrical and mechanical specifications across all critical parameters.

Product Status Consideration: The PV10-10F-E is classified as obsolete, while the PV10-10F-L is active. Selection of the active part ensures continued availability and supply chain reliability.

Compliance Status: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for equivalent applications.

Packaging Difference: The main part number does not specify packaging, while the substitute is supplied in bulk packaging. This difference does not affect functional equivalence and may provide procurement flexibility.

For applications currently using PV10-10F-E, direct substitution with PV10-10F-L is appropriate based on complete parameter equivalence and active product status.

Frequently Asked Questions (FAQ)

Q: Can PV10-10F-L be used as a direct replacement for PV10-10F-E?

A: Yes. The PV10-10F-L is a direct functional equivalent. All electrical parameters (wire gauge, stud size, contact material and finish), mechanical dimensions (width, length, insulation diameter, tongue opening), and material specifications (vinyl insulation, brazed seam construction) are identical between the two parts.

Q: Why is the PV10-10F-E listed as obsolete?

A: The PV10-10F-E is no longer in active production by Panduit Corp. The PV10-10F-L serves as the active equivalent and should be used for new designs and replacement applications.

Q: Are there any compatibility concerns when switching from PV10-10F-E to PV10-10F-L?

A: No compatibility concerns exist. The parts are mechanically and electrically identical. They will function identically in any application where the original part was specified.

Q: What is the difference in packaging between these parts?

A: The PV10-10F-E packaging is not specified in available documentation. The PV10-10F-L is supplied in bulk packaging. This packaging difference does not affect the terminal's performance or compatibility.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both PV10-10F-E and PV10-10F-L are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements.

Q: What wire gauges are compatible with these terminals?

A: Both parts are rated for 10-12 AWG wire. This range must be observed during installation to ensure proper crimp connection and electrical performance.

Q: What is the stud size for these terminals?

A: Both parts are designed for #10 stud connections. The tongue inside opening of 0.200" (5.08mm) accommodates this stud size.