PTCCL07H141HTE Ceramic PTC Resettable Fuse - Equivalent & Substitute Parts

Part Overview

The PTCCL07H141HTE is a ceramic PTC resettable fuse manufactured by Vishay Beyschlag/Draloric/BC Components, rated for 265V maximum voltage with a 140 mA hold current. This component functions as a self-resetting overcurrent protection device for electronic circuits, automatically interrupting current flow during fault conditions and restoring operation when the fault is cleared. The part is currently in active production status with 1805 units available in cut tape packaging. Substitute parts are identified when packaging format differs while all electrical and mechanical specifications remain identical.

Substiute Parts

PTCCL07H141HTE

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1885PTCCL07H141HTE Datasheet

Current PartRFQ

PTCCL07H141HBE

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 2202PTCCL07H141HBE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PTCCL07H141HTE is determined by strict equivalence across all electrical parameters and mechanical dimensions. The primary substitution criterion is identical performance characteristics: maximum voltage rating of 265V, hold current of 140 mA, trip current of 210 mA, and maximum current of 800 mA. Mechanical compatibility requires matching through-hole radial disc package configuration with identical lead spacing of 0.197" (5.00mm) and overall dimensions of 0.276" diameter by 0.217" thickness. The substitute part PTCCL07H141HBE maintains all these specifications while differing only in packaging format (bulk versus cut tape). Both parts share the same base product number PTCCL within the 265V series, confirming functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both PTCCL07H141HTE and PTCCL07H141HBE are active production components from Vishay Beyschlag/Draloric/BC Components with identical electrical and mechanical specifications. Selection between these parts depends on procurement and assembly requirements rather than functional performance. The PTCCL07H141HTE in cut tape packaging is suitable for automated pick-and-place assembly processes. The PTCCL07H141HBE in bulk packaging accommodates manual assembly or alternative handling methods. Both parts maintain ROHS3 compliance and REACH affected status, meeting current regulatory requirements. UR approval agency certification is consistent across both variants. Component selection should be based on production volume, assembly methodology, and supply chain logistics.

Frequently Asked Questions (FAQ)

Q: Can PTCCL07H141HBE replace PTCCL07H141HTE in circuit applications? A: Yes. Both parts are electrically and mechanically identical, with 265V maximum voltage, 140 mA hold current, 210 mA trip current, and 29 Ohms typical resistance at 25°C. The only difference is packaging format (bulk versus cut tape).

Q: What determines compatibility between these substitute parts? A: Compatibility is determined by matching voltage rating (265V), current specifications (140 mA hold, 210 mA trip, 800 mA maximum), operating temperature range (0°C to 70°C), through-hole radial disc package configuration, and lead spacing (0.197" / 5.00mm).

Q: Does packaging format affect electrical performance? A: No. Cut tape and bulk packaging formats do not affect electrical performance or component characteristics. Packaging selection is based on assembly process requirements and supply chain considerations.

Q: Are both parts compliant with current regulations? A: Yes. Both PTCCL07H141HTE and PTCCL07H141HBE are ROHS3 compliant and REACH affected, meeting current regulatory standards. Both carry UR approval agency certification.

Q: What is the lead spacing requirement for PCB design? A: Lead spacing is 0.197" (5.00mm) for both parts. PCB footprint design must accommodate this spacing for proper component mounting.

Q: Can these parts be used interchangeably in automated assembly? A: PTCCL07H141HTE in cut tape packaging is optimized for automated pick-and-place assembly. PTCCL07H141HBE in bulk packaging requires alternative handling methods. Equipment compatibility depends on assembly line configuration.