PT07E-8-2S(SR) Equivalent & Substitute Parts

Part Overview

The PT07E-8-2S(SR) is a 2-position circular connector receptacle manufactured by Amphenol Industrial Operations. This component is classified as a position circular connector and is currently in active product status with 1159 units available in inventory. Circular connectors of this specification are essential in applications requiring reliable electrical and mechanical interconnection with standardized bayonet locking mechanisms. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative sourcing options when the primary component becomes unavailable or when system requirements necessitate alternative configurations.

Substiute Parts

PT07E-8-2S(SR)

Amphenol Industrial OperationsIn Stock: 1184PT07E-8-2S(SR) Datasheet

Current PartRFQ

MSW07E8-2S-SR

Milspecwest, LLCIn Stock: 1048MSW07E8-2S-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PT07E-8-2S(SR) is determined by the following critical parameters:

• Number of Positions: Must be 2
• Shell Size - Insert: Must be 8-2
• Fastening Type: Must be Bayonet Lock
• Connector Category: Must be Circular Connectors
• Product Status: Must be Active

The substitute part MSW07E8-2S-SR meets all mandatory substitution criteria. Both components share identical position count (2), shell size designation (8-2), and bayonet locking mechanism. Both are active products from established manufacturers in the circular connector category, ensuring design compatibility and functional equivalence for applications requiring this connector specification.

Parameter Comparison

Engineering Selection Recommendations

Both PT07E-8-2S(SR) and MSW07E8-2S-SR are active products with current manufacturing support and established supply chains. Selection between these components should be based on application-specific requirements including mounting configuration, termination method, and environmental operating conditions. The MSW07E8-2S-SR provides documented electrical ratings (7.5A at 800V) and temperature range (-55°C ~ 125°C), which may be relevant for applications with defined performance specifications. Both components maintain adequate inventory levels for procurement planning.

Frequently Asked Questions (FAQ)

Q: What makes MSW07E8-2S-SR a valid substitute for PT07E-8-2S(SR)?

A: Both connectors share the critical substitution parameters: 2-position configuration, 8-2 shell size designation, and bayonet locking mechanism. These parameters define mechanical and electrical compatibility within the circular connector category.

Q: Are there differences in mounting configuration between these parts?

A: The MSW07E8-2S-SR specifies panel mount with bulkhead front side nut mounting feature. The PT07E-8-2S(SR) mounting configuration is not detailed in available specifications. Verify mounting requirements against your application before substitution.

Q: What is the difference in packaging between these parts?

A: PT07E-8-2S(SR) is supplied in bulk packaging, while MSW07E8-2S-SR is supplied in bag packaging. This distinction affects receiving, storage, and handling procedures but does not impact component functionality.

Q: Can I use MSW07E8-2S-SR in military applications?

A: MSW07E8-2S-SR is specified for military applications. Confirm that your application requirements align with the documented specifications and compliance status of the substitute component.

Q: What is the RoHS compliance status of these connectors?

A: MSW07E8-2S-SR is RoHS non-compliant. If your application requires RoHS compliance, this substitution may not be suitable. Verify compliance requirements for your specific application.