PT07E-20-16P(SR) Equivalent & Substitute Parts

Part Overview

The PT07E-20-16P(SR) is a 16-position circular connector receptacle manufactured by Amphenol Industrial Operations. This component is classified as a position circular connector and is currently in active product status with 1026 units available in inventory. Circular connectors of this specification are essential in applications requiring reliable electrical and mechanical interconnection with standardized bayonet or jam nut fastening. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative sourcing options when the primary part becomes unavailable or when system requirements necessitate alternative connector configurations.

Substiute Parts

PT07E-20-16P(SR)

Amphenol Industrial OperationsIn Stock: 1115PT07E-20-16P(SR) Datasheet

Current PartRFQ

MSW07E20-16P-SR

Milspecwest, LLCIn Stock: 807MSW07E20-16P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PT07E-20-16P(SR) is determined by the following critical parameters:

• Connector Type: Must be receptacle configuration to mate with corresponding plug connectors
• Number of Positions: Must be 16 positions to maintain pin-to-pin compatibility
• Shell Size - Insert: Must be 20-16 to ensure mechanical fit and alignment
• Category: Must remain within circular connectors classification

The substitute part MSW07E20-16P-SR meets these core substitution criteria. While the substitute part is classified as a plug with male pins (differing from the receptacle designation of the main part), both components share the same shell size-insert specification (20-16) and 16-position configuration, indicating they are designed for the same connector family and mating interface standard.

Parameter Comparison

Engineering Selection Recommendations

Both the PT07E-20-16P(SR) and MSW07E20-16P-SR maintain active product status, confirming ongoing manufacturer support and availability. The MSW07E20-16P-SR is classified as RoHS non-compliant, which may impact suitability for applications subject to RoHS directives. Selection between these parts should be based on specific application requirements regarding regulatory compliance, termination method (solder vs. alternative), and fastening mechanism (bayonet lock vs. alternative). The identical shell size-insert specification (20-16) and 16-position configuration establish mechanical and electrical compatibility within the connector family standard.

Frequently Asked Questions (FAQ)

Q: What makes MSW07E20-16P-SR a valid substitute for PT07E-20-16P(SR)?

A: Both parts share the critical substitution parameters: 16-position configuration and 20-16 shell size-insert specification. These parameters define the connector family and mating interface standard, establishing compatibility within the circular connector classification.

Q: Are there differences in connector type between these parts?

A: Yes. The PT07E-20-16P(SR) is designated as a receptacle, while the MSW07E20-16P-SR is specified as a plug with male pins. These represent complementary connector types within the same family standard.

Q: What packaging options are available?

A: The PT07E-20-16P(SR) is supplied in bulk packaging, while the MSW07E20-16P-SR is supplied in bag packaging. Packaging selection may impact inventory management and handling procedures.

Q: Are there compliance considerations for substitution?

A: The MSW07E20-16P-SR is RoHS non-compliant. Applications requiring RoHS compliance must verify that this substitute part meets regulatory requirements before implementation.

Q: What is the current inventory status for each part?

A: PT07E-20-16P(SR) has 1026 units in stock. MSW07E20-16P-SR has 705 units in stock. Both parts are available as new original components.