PT07E-14-5S(SR) Equivalent & Substitute Parts

Part Overview

The PT07E-14-5S(SR) is a 5-position circular connector receptacle manufactured by Amphenol Industrial Operations. This component is classified as a position circular connector and is currently in active product status with 913 units available in inventory. Circular connectors of this specification are essential in applications requiring reliable electrical and mechanical interconnection with standardized bayonet locking mechanisms. Substitute parts may be required due to supply chain considerations, inventory availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

PT07E-14-5S(SR)

Amphenol Industrial OperationsIn Stock: 951PT07E-14-5S(SR) Datasheet

Current PartRFQ

MSW07E14-5S-SR

Milspecwest, LLCIn Stock: 817MSW07E14-5S-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PT07E-14-5S(SR) is determined by the following critical parameters:

• Connector Type: Plug with female sockets
• Number of Positions: 5
• Shell Size - Insert: 14-5
• Fastening Type: Bayonet lock
• Termination Method: Solder
• Mounting Configuration: Panel mount with bulkhead front side nut
• Electrical Ratings: Current capacity and voltage rating compatibility
• Operating Temperature Range: -55°C to 125°C
• Environmental Classification: Environment resistant ingress protection

The substitute part MSW07E14-5S-SR meets these critical parameters and is therefore classified as an equivalent component for this application category.

Parameter Comparison

Engineering Selection Recommendations

Both the PT07E-14-5S(SR) and MSW07E14-5S-SR are active products suitable for circular connector applications requiring 5-position bayonet-lock configurations with solder termination. The MSW07E14-5S-SR is classified as RoHS non-compliant, which may be a determining factor for applications subject to RoHS compliance requirements. Selection between these components should be based on specific application compliance mandates, packaging requirements (bulk versus bag), and inventory availability at the time of procurement.

Frequently Asked Questions (FAQ)

Q: What makes MSW07E14-5S-SR a valid substitute for PT07E-14-5S(SR)?

A: Both components share identical critical specifications: 5-position configuration, 14-5 shell size, bayonet lock fastening, solder termination, and panel mount bulkhead installation. These parameters define mechanical and electrical compatibility for this connector category.

Q: Are there differences in packaging between these parts?

A: Yes. The PT07E-14-5S(SR) is supplied in bulk packaging, while the MSW07E14-5S-SR is supplied in bag packaging. Packaging selection may affect handling, storage, and procurement processes.

Q: What is the significance of RoHS compliance status?

A: The MSW07E14-5S-SR is RoHS non-compliant. Applications subject to RoHS regulations or customer requirements must use the PT07E-14-5S(SR) or verify that RoHS non-compliance is acceptable for the intended application.

Q: Can these connectors be used interchangeably in the same assembly?

A: Mechanical and electrical interchangeability is supported by matching position count, shell size, fastening mechanism, and termination method. Compliance requirements and environmental specifications must be verified against application requirements.

Q: What inventory considerations should guide part selection?

A: The PT07E-14-5S(SR) has 913 units in stock, while MSW07E14-5S-SR has 805 units available. Procurement timelines and volume requirements should factor into component selection.