Equivalent & Substitute Parts Reference for PSS6-48-5

Part Overview

Manufacturer Part Number PSS6-48-5, produced by TDK-Lambda Americas Inc, is an isolated module DC-DC converter in the ITE (Commercial) category with a single 5V output at 1.2A and input voltage range from 36V to 76V. The module supports remote On/Off and OCP features, operates over -40°C to 85°C (with derating), and offers 6 W maximum output power in a 6-DIP through-hole form factor. This part is classified as obsolete, necessitating the identification of substitute models to ensure system support and continued product lifecycle compatibility.

Substiute Parts

PSS6-48-5

TDK-Lambda Americas IncIn Stock: 1002PSS6-48-5 Datasheet

Current PartRFQ

CC6-4805SF-E

TDK-Lambda Americas IncIn Stock: 1688CC6-4805SF-E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by matching critical electrical and mechanical parameters required for system compatibility. For the DC-DC Converter category, equivalent parts are grouped strictly by:

• Manufacturer
• Type (Isolated Module)
• Number of Outputs
• Input Voltage Range
• Output Voltage
• Maximum Output Current
• Maximum Output Power
• Application Type
• Operating Temperature Range
• Mounting Type
• Package / Case
• Size/Dimension (where applicable)
• MSL (Moisture Sensitivity Level)

Parts listed as substitutes must meet these specifications in the context provided.

Parameter Comparison

Engineering Selection Recommendations

PSS6-48-5 is designated as obsolete, while CC6-4805SF-E is active and RoHS compliant. Both parts demonstrate equivalent key technical parameters in input/output ratings, isolation, and application classification, with CC6-4805SF-E maintaining MSL 1 (unlimited) and full REACH status. Substitute selection is therefore supported for systems requiring ongoing compliance and active product lifecycle status.

Frequently Asked Questions (FAQ)

Q1: What are the main criteria for substituting PSS6-48-5?
A1: The main criteria are matching the input voltage range (36V to 76V), output voltage (5V), output current (1.2A), output power (6W), isolation type (Isolated Module), ITE (Commercial) application classification, through-hole mounting, package type, and operating temperature range.

Q2: Is the CC6-4805SF-E pin compatible with the PSS6-48-5?
A2: The main difference is the package/case type: PSS6-48-5 is a 6-DIP Module, while CC6-4805SF-E is a 7-DIP Module. Physical compatibility should be verified according to PCB layout and mechanical drawings.

Q3: Does CC6-4805SF-E meet compliance and environmental criteria required for replacement?
A3: CC6-4805SF-E is RoHS compliant, MSL 1 (unlimited), and REACH unaffected, matching or exceeding the compliance status of the original.

Q4: Can both parts be used in identical application environments?
A4: Both parts are specified for ITE (Commercial) applications and share the same electrical performance ratings and operating temperature range.

Q5: Are there differences in size and mounting between the original and substitute?
A5: The substitute CC6-4805SF-E has slightly different size and case format, with 0.90" x 0.83" x 0.34" dimensions (22.9mm x 21.1mm x 8.5mm) compared to the original 1.12" x 0.80" x 0.31" (28.4mm x 20.3mm x 8.0mm). Mounting type remains through-hole.