Equivalent & Substitute Parts Reference for PSS10-48-5

Part Overview

The TDK-Lambda Americas Inc PSS10-48-5 is an Isolated Module DC DC Converter with a single 5V output at 2A, rated at 10W power. Its input voltage range is 36V to 76V, suitable for ITE (Commercial) applications. The product status is Obsolete, which necessitates selecting alternative DC DC converter models to ensure continued manufacturability and serviceability in electronic designs where the PSS10-48-5 was previously specified.

Substiute Parts

PSS10-48-5

TDK-Lambda Americas IncIn Stock: 1094PSS10-48-5 Datasheet

Current PartRFQ

CC10-4805SF-E

TDK-Lambda Americas IncIn Stock: 1057CC10-4805SF-E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based strictly on matching key parameters: output voltage and current ratings, input voltage range, power capability, application type, mounting style, package type, and regulatory data. The substitute components below are sourced directly from the same manufacturer, ensuring compatibility with ITE (Commercial) use, identical input/output performance, and through-hole mounting for equivalent mechanical integration.

Key parameters used:

• 5V single output, 2A max current
• 10 W power rating
• Input voltage range: 36V – 76V
• Isolated Module, Through Hole mounting
• Application: ITE (Commercial)
• Package/case dimensions and MSL
• ECCN and HTSUS status

Parameter Comparison

Engineering Selection Recommendations

The PSS10-48-5 main part is listed as Obsolete, while the substitute CC10-4805SF-E is Active. Both share the same manufacturer, electrical ratings, mounting type, compliance status (MSL 1, ECCN EAR99, and HTSUS 8504.40.9580), and intended application. CC10-4805SF-E is RoHS Compliant and REACH Unaffected, data which is not specified for PSS10-48-5. The package differs slightly (6-DIP vs 7-DIP Module), as do the physical dimensions. These factors must be considered for mechanical integration only within the limits of provided parameters.

Frequently Asked Questions (FAQ)

Q: What primary parameters must match for substituting a DC DC converter?
A: Output voltage, output current, input voltage range, power rating, application category, mounting type, and compliance status must align for direct substitution.

Q: Does the substitute part CC10-4805SF-E provide the same performance as PSS10-48-5?
A: Both provide 5V/2A output at up to 10 W with an input range of 36V to 76V for ITE (Commercial) applications.

Q: Are there compatibility concerns with the package difference?
A: The substitute is a 7-DIP Module compared to the 6-DIP Module of the original. Physical dimensions vary; compatibility should be confirmed with actual board footprints within the parameters provided.

Q: Are there differences in compliance or regulatory status?
A: Both parts have MSL 1 (Unlimited), ECCN EAR99, and HTSUS 8504.40.9580. The substitute lists RoHS and REACH attributes.

Q: Can CC10-4805SF-E be directly used in place of PSS10-48-5 in legacy designs?
A: Based on the specified electrical, mechanical, and compliance parameters, CC10-4805SF-E is a direct substitute within these criteria.

Q: What is the significance of the product status 'Obsolete' for PSS10-48-5?
A: ‘Obsolete’ status requires engineers to identify and validate an active equivalent, such as CC10-4805SF-E, for continued supply chain and production support.