PS-60PE-D4LT1-B1AE Equivalent & Substitute Parts

Part Overview

The PS-60PE-D4LT1-B1AE is a rectangular connector header manufactured by JAE Electronics, designed for through-hole, right-angle board-to-cable applications. This 60-position connector operates at 0.100" (2.54mm) pitch with shrouded 4-wall construction and detent lock fastening. The product is currently obsolete, making equivalent substitute parts necessary for ongoing system maintenance, repairs, and legacy design support.

Substiute Parts

PS-60PE-D4LT1-B1AE

JAE ElectronicsIn Stock: 1187PS-60PE-D4LT1-B1AE Datasheet

Current PartRFQ

7-102617-8

TE Connectivity AMP ConnectorsIn Stock: 6727-102617-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PS-60PE-D4LT1-B1AE is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Type: Header with male pins
• Position Count & Row Configuration: 60 positions in 2 rows
• Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Orientation: Through-hole, right-angle configuration
• Shrouding & Fastening: Shrouded 4-wall construction with detent lock
• Termination Method: Solder termination
• Contact Finish: Gold-plated mating surface with tin-plated posts
• Flammability Compliance: UL94 V-0 rating
• Moisture Sensitivity: MSL 1 (Unlimited)

The substitute part 7-102617-8 (TE Connectivity AMP Connectors) meets all these critical parameters, enabling direct functional equivalence for applications requiring the PS-60PE-D4LT1-B1AE.

Parameter Comparison

Engineering Selection Recommendations

The 7-102617-8 (TE Connectivity AMP Connectors AMPMODU Mod II series) is a direct functional equivalent to the obsolete PS-60PE-D4LT1-B1AE. Selection of this substitute is supported by:

• Product Status: The substitute maintains active production status, ensuring availability for current and future procurement cycles.
• Compliance Certifications: Both parts carry UL94 V-0 flammability ratings and MSL 1 moisture sensitivity levels, meeting identical safety and environmental standards.
• RoHS Compliance: The substitute is ROHS3 compliant, satisfying modern regulatory requirements for electronic components.
• Electrical & Mechanical Compatibility: All critical parameters—pitch, position count, row configuration, mounting type, shrouding, fastening mechanism, and contact finishes—are identical between the main part and substitute.

The 7-102617-8 is suitable for direct replacement in applications previously designed for the PS-60PE-D4LT1-B1AE without design modification.

Frequently Asked Questions (FAQ)

Q: Can the 7-102617-8 be used as a direct replacement for the PS-60PE-D4LT1-B1AE?

A: Yes. Both connectors share identical critical parameters: 60-position, 2-row configuration at 0.100" (2.54mm) pitch, through-hole right-angle mounting, shrouded 4-wall construction, detent lock fastening, and gold/tin contact finishes. Mechanical and electrical compatibility is assured.

Q: What are the key differences between these two parts?

A: The primary differences are product status and contact material composition. The PS-60PE-D4LT1-B1AE (JAE) is obsolete with copper alloy contacts, while the 7-102617-8 (TE Connectivity) is active with phosphor bronze contacts. The TE part also features slightly longer contact lengths and greater insulation height, along with ROHS3 compliance and specified operating temperature range (-65°C ~ 105°C) and current rating (3A).

Q: Are there packaging differences between these parts?

A: Yes. The PS-60PE-D4LT1-B1AE packaging is not specified in available documentation. The 7-102617-8 is supplied in Tray packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Do both parts meet the same safety and environmental standards?

A: Yes. Both parts carry UL94 V-0 flammability ratings and MSL 1 (Unlimited) moisture sensitivity levels. The 7-102617-8 additionally provides ROHS3 compliance certification.

Q: What is the contact length difference, and does it affect compatibility?

A: The PS-60PE-D4LT1-B1AE has a mating contact length of 0.236" (6.00mm), while the 7-102617-8 has 0.318" (8.08mm). The post contact lengths are 0.110" (2.79mm) and 0.135" (3.43mm) respectively. These differences do not affect functional compatibility in standard board-to-cable applications, as both maintain the same pitch and row spacing geometry.