PS2913-1-F3-A Equivalent & Substitute Parts

Part Overview

The PS2913-1-F3-A is a 2500Vrms optoisolator with transistor output manufactured by CEL. This component features single-channel isolation in a 4-SMD flat-lead package, designed for DC input applications with 30mA output current capability. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for continued system support and new design implementations.

Substiute Parts

PS2913-1-F3-A

CELIn Stock: 6450PS2913-1-F3-A Datasheet

Current PartRFQ

PS2913-1-F3-AX

Renesas Electronics CorporationIn Stock: 1956PS2913-1-F3-AX Datasheet

Parametric EquivalentRFQ

PS2913-1-V-AX

Renesas Electronics CorporationIn Stock: 2021PS2913-1-V-AX Datasheet

Parametric EquivalentRFQ

PS2913-1-V-F3-AX

Renesas Electronics CorporationIn Stock: 5807PS2913-1-V-F3-AX Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PS2913-1-F3-A is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Voltage isolation rating: 2500Vrms
• Single-channel configuration
• Current transfer ratio range: 50% to 200% @ 1mA
• Switching timing: 80µs turn-on, 50µs turn-off
• Maximum output voltage: 120V
• Output current per channel: 30mA
• Transistor output type with 300mV maximum Vce saturation
• Operating temperature range: -55°C to 100°C
• DC input type

Mechanical Equivalence Criteria:

• 4-SMD flat-lead package configuration
• Surface mount mounting type
• Moisture sensitivity level 1 (unlimited)

All identified substitute parts maintain 100% compliance with these parameters. Substitutes differ only in manufacturer (Renesas Electronics Corporation), product status (active vs. obsolete), packaging format (tape & reel or strip), and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

All three Renesas substitute parts (PS2913-1-F3-AX, PS2913-1-V-AX, PS2913-1-V-F3-AX) provide complete electrical and mechanical equivalence to the obsolete PS2913-1-F3-A. Selection among these active alternatives is determined by packaging and supply chain requirements:

PS2913-1-F3-AX is supplied in tape & reel format with 1938 units in stock. This packaging is standard for automated assembly processes and high-volume production environments.

PS2913-1-V-AX is supplied in strip format with 1948 units in stock. This packaging accommodates manual assembly or lower-volume applications.

PS2913-1-V-F3-AX is supplied in tape & reel format with the highest inventory availability at 5742 units in stock. This option provides maximum supply security for sustained production requirements.

All substitute parts carry ROHS3 compliance certification, whereas the original part's RoHS status was not specified. All parts maintain REACH unaffected status and identical ECCN and HTSUS classifications.

Frequently Asked Questions (FAQ)

Q: Can PS2913-1-F3-AX, PS2913-1-V-AX, and PS2913-1-V-F3-AX be used interchangeably with PS2913-1-F3-A?

A: Yes. All three Renesas parts maintain identical electrical specifications including 2500Vrms isolation, 50-200% current transfer ratio, 80µs/50µs switching times, 120V maximum output voltage, and 30mA output current. Mechanical compatibility is confirmed through identical 4-SMD flat-lead package configuration and surface mount mounting type.

Q: What is the difference between the three substitute parts?

A: The three Renesas substitutes differ only in packaging format and inventory levels. PS2913-1-F3-AX and PS2913-1-V-F3-AX are supplied in tape & reel format suitable for automated assembly. PS2913-1-V-AX is supplied in strip format. All three are electrically and mechanically identical.

Q: Why is the original PS2913-1-F3-A classified as obsolete?

A: The PS2913-1-F3-A is marked obsolete by the manufacturer CEL. The active Renesas equivalents provide continued access to this optoisolator specification for new designs and legacy system support.

Q: Are there any compliance differences between the original and substitute parts?

A: The substitute parts carry ROHS3 compliance certification. The original part's RoHS status was not specified. All parts maintain identical REACH unaffected status and ECCN/HTSUS classifications.

Q: Which substitute should be selected for new designs?

A: For new designs, PS2913-1-V-F3-AX is recommended based on highest inventory availability (5742 units) and tape & reel packaging standard for automated assembly processes. PS2913-1-F3-AX provides equivalent specifications with lower inventory (1938 units). PS2913-1-V-AX accommodates applications requiring strip packaging format.

Q: Are the operating temperature ranges identical?

A: Yes. All parts operate across -55°C to 100°C, maintaining identical thermal performance specifications.

Q: Can these parts be used in existing PCB layouts designed for PS2913-1-F3-A?

A: Yes. The 4-SMD flat-lead package configuration is identical across all parts, ensuring direct PCB footprint compatibility without layout modifications.