PS2833-1-V-F3-A Equivalent & Substitute Parts

Part Overview

The PS2833-1-V-F3-A is a 4-pin surface mount optoisolator manufactured by Renesas Electronics Corporation. This component features Darlington output configuration with 2500Vrms isolation voltage rating, designed for DC input applications requiring high-speed signal isolation. The part is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance, isolation characteristics, and mechanical compatibility are maintained across the product family while accommodating different packaging or distribution formats.

Substiute Parts

PS2833-1-V-F3-A

Renesas Electronics CorporationIn Stock: 1634PS2833-1-V-F3-A Datasheet

Current PartRFQ

PS2833-1-F3-A

Renesas Electronics CorporationIn Stock: 73737PS2833-1-F3-A Datasheet

Parametric EquivalentRFQ

PS2833-1-V-A

Renesas Electronics CorporationIn Stock: 2145PS2833-1-V-A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PS2833-1-V-F3-A are identified from the PS2833 base product family. Substitution eligibility is determined by matching the following critical parameters:

• Voltage - Isolation: 2500Vrms
• Number of Channels: 1
• Output Type: Darlington
• Current Transfer Ratio range: 400% to 4500% @ 1mA
• Voltage - Output (Max): 350V
• Current - Output / Channel: 60mA
• Vce Saturation (Max): 1V
• Rise / Fall Time: 20µs, 5µs
• Operating Temperature: -55°C to 100°C
• Package / Case: 4-SOIC (0.173", 4.40mm Width)
• Input Type: DC
• Mounting Type: Surface Mount

Substitute parts differ only in packaging format (Tape & Reel versus Strip) and series designation, with no variation in electrical performance or functional characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PS2833-1-V-F3-A, PS2833-1-F3-A, and PS2833-1-V-A—are Active product status components manufactured by Renesas Electronics Corporation with identical electrical specifications and functional performance. Selection between these parts is determined by packaging and distribution requirements rather than electrical characteristics.

PS2833-1-V-F3-A is supplied in Tape & Reel (TR) format, suitable for automated assembly processes and high-volume production environments.

PS2833-1-F3-A is also supplied in Tape & Reel (TR) format with NEPOC series designation and represents the highest available inventory (73,667 pieces).

PS2833-1-V-A is supplied in Strip packaging format, appropriate for manual assembly, prototyping, or lower-volume applications.

All parts maintain full RoHS3 compliance, REACH Unaffected status, and EAR99 export classification. Moisture sensitivity level is 1 (Unlimited) across all variants, indicating no special storage or handling requirements. Selection should be based on production volume, assembly methodology, and supply chain logistics rather than technical performance criteria.

Frequently Asked Questions (FAQ)

Q: Can PS2833-1-F3-A be used as a direct replacement for PS2833-1-V-F3-A?

A: Yes. Both parts share identical electrical specifications, isolation voltage, current transfer ratio, output characteristics, and operating temperature range. The only difference is series designation (NEPOC versus unspecified). Both are supplied in Tape & Reel format and are suitable for automated assembly.

Q: What is the primary difference between PS2833-1-V-A and the other two substitutes?

A: PS2833-1-V-A is supplied in Strip packaging format instead of Tape & Reel. All electrical and functional parameters remain identical. Strip packaging is typically used for manual assembly or lower-volume applications, while Tape & Reel format is optimized for automated pick-and-place assembly.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts use the 4-SOIC package with 0.173" width and 4.40mm dimensions. PCB footprint and land pattern requirements are identical across all variants.

Q: Do these parts require different handling or storage procedures?

A: No. All three parts have Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no special moisture control or baking procedures are required before soldering.

Q: Which substitute part offers the best inventory availability?

A: PS2833-1-F3-A provides the highest inventory level at 73,667 pieces in stock, compared to 1,599 pieces for PS2833-1-V-F3-A and 2,108 pieces for PS2833-1-V-A.

Q: Are there any compliance or regulatory differences between these parts?

A: No. All three parts maintain identical RoHS3 compliance, REACH Unaffected status, and EAR99 export classification. Regulatory and environmental compliance is equivalent across all variants.

Q: Can PS2833-1-V-A be used in high-volume automated assembly?

A: While PS2833-1-V-A is electrically equivalent, its Strip packaging format is not optimized for automated pick-and-place assembly. For high-volume production, PS2833-1-V-F3-A or PS2833-1-F3-A in Tape & Reel format are recommended.