PRG.M0.2GL.LC52V Equivalent & Substitute Parts

Part Overview

The PRG.M0.2GL.LC52V is a 2-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for applications requiring push-pull detent lock fastening in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 1160 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements necessitate evaluation of equivalent connectors with comparable electrical and mechanical specifications.

Substiute Parts

PRG.M0.2GL.LC52V

LEMOIn Stock: 1211PRG.M0.2GL.LC52V Datasheet

Current PartRFQ

K11M07-P02LPH0-5250

ODUIn Stock: 1231K11M07-P02LPH0-5250 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRG.M0.2GL.LC52V are identified based on strict equivalence of the following critical parameters:

• Connector Type & Configuration: Receptacle with female sockets
• Position Count: 2-position
• Termination Method: Solder cup
• Fastening Mechanism: Push-pull detent lock
• Shell Material: Polysulfone (PSU)
• Contact Finish: Gold plating on mating surfaces
• Ingress Protection: IP50 dust protection
• Cable Opening Range: 0.157" ~ 0.205" (4.00mm ~ 5.20mm)
• Regulatory Compliance: ROHS3 compliant, REACH unaffected

The substitute part K11M07-P02LPH0-5250 (ODU MEDI-SNAP®) meets all critical substitution criteria. Variations in current rating (14A vs. 10A) and maximum operating temperature (-50°C ~ 120°C vs. -50°C ~ 150°C) represent enhanced or equivalent performance characteristics that do not restrict substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Both the PRG.M0.2GL.LC52V and K11M07-P02LPH0-5250 are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial, medical, and automotive applications.

The PRG.M0.2GL.LC52V operates across a wider temperature range (-50°C to 150°C) compared to the ODU substitute (-50°C to 120°C). Selection between these parts should be based on specific application temperature requirements. The ODU part provides higher current capacity (14A vs. 10A), which may offer design margin in power delivery applications.

Both connectors maintain identical mechanical and electrical interface specifications, including 2-position configuration, solder cup termination, push-pull detent lock fastening, and IP50 ingress protection. Inventory availability and lead time considerations may influence part selection between these equivalent options.

Frequently Asked Questions (FAQ)

Q: Can K11M07-P02LPH0-5250 be used as a direct replacement for PRG.M0.2GL.LC52V?

A: Yes, the K11M07-P02LPH0-5250 meets all critical substitution criteria including connector type, position count, termination method, fastening mechanism, shell material, contact finish, and ingress protection rating. Both parts are mechanically and electrically compatible for 2-position solder cup applications.

Q: What are the differences in operating temperature ranges?

A: The PRG.M0.2GL.LC52V operates from -50°C to 150°C, while the K11M07-P02LPH0-5250 operates from -50°C to 120°C. Applications requiring operation above 120°C must use the LEMO part. For applications within the -50°C to 120°C range, both parts are suitable.

Q: How do the current ratings differ?

A: The PRG.M0.2GL.LC52V is rated for 10A, while the K11M07-P02LPH0-5250 is rated for 14A. The higher rating of the ODU part does not restrict its use in 10A applications and may provide additional design margin.

Q: Are both parts compliant with current regulations?

A: Yes, both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for industrial, medical, and automotive applications.

Q: What is the cable opening specification for both connectors?

A: Both the PRG.M0.2GL.LC52V and K11M07-P02LPH0-5250 accommodate cable diameters of 0.157" to 0.205" (4.00mm to 5.20mm), ensuring compatibility with standard cable sizes for 2-position solder cup applications.

Q: Do both connectors provide the same ingress protection?

A: Yes, both parts provide IP50 ingress protection, offering dust protection suitable for industrial and medical environments.