PRG3216P-2002-D-T5 Equivalent & Substitute Parts

Part Overview

The PRG3216P-2002-D-T5 is a 20 kOhms ±0.5% 1W thin film chip resistor in Wide 1206 (3216 Metric) surface mount package manufactured by Susumu. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained while meeting specific application requirements.

Substiute Parts

PRG3216P-2002-D-T5

SusumuIn Stock: 1201PRG3216P-2002-D-T5 Datasheet

Current PartRFQ

PRG3216P-2002-B-T5

SusumuIn Stock: 1315PRG3216P-2002-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PRG3216P-2002-D-T5 is determined by strict equivalence in the following parameters:

Critical Parameters for Substitution:

• Resistance value: 20 kOhms (exact match required)
• Power rating: 1W (exact match required)
• Package type: Wide 1206 (3216 Metric), 0612 (exact match required)
• Composition: Thin Film (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS3 compliance (required)
• Moisture sensitivity level: 1 (required)

Allowable Variation:

• Tolerance: Tighter tolerance specifications (±0.1%) are acceptable as upgrades, as they provide improved accuracy without compromising circuit performance

The substitute part PRG3216P-2002-B-T5 meets all critical parameters with an improved tolerance specification.

Parameter Comparison

Engineering Selection Recommendations

PRG3216P-2002-D-T5 (Main Part): Active product status with full regulatory compliance. Suitable for applications requiring 20 kOhms ±0.5% tolerance specification. RoHS3 compliant and REACH unaffected designation confirms environmental and regulatory suitability for commercial and industrial applications.

PRG3216P-2002-B-T5 (Substitute Part): Active product status with identical regulatory compliance profile. Provides tighter tolerance specification of ±0.1% compared to the main part's ±0.5%. Direct mechanical and electrical compatibility confirmed through identical package dimensions, power rating, temperature coefficient, and operating temperature range. Selection of this substitute is appropriate when improved tolerance accuracy is required without modification to circuit design or PCB layout.

Both parts maintain identical thermal performance characteristics and environmental compliance certifications, ensuring interchangeability within the specified parameter constraints.

Frequently Asked Questions (FAQ)

Q: Can PRG3216P-2002-B-T5 be used as a direct replacement for PRG3216P-2002-D-T5?

A: Yes. Both parts are mechanically and electrically compatible. The substitute part features identical package dimensions (0.063" L x 0.126" W), power rating (1W), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). The substitute provides improved tolerance accuracy (±0.1% versus ±0.5%), which does not compromise circuit performance.

Q: What is the primary difference between these two parts?

A: The primary difference is tolerance specification. PRG3216P-2002-D-T5 specifies ±0.5% tolerance, while PRG3216P-2002-B-T5 specifies ±0.1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both PRG3216P-2002-D-T5 and PRG3216P-2002-B-T5 are RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), confirming suitability for standard manufacturing and storage conditions.

Q: Will PCB layout require modification when substituting these parts?

A: No. Both parts share identical package dimensions and termination configuration. PCB layout, footprint, and assembly parameters remain unchanged.

Q: What is the temperature coefficient specification for both parts?

A: Both parts specify ±25ppm/°C temperature coefficient across the operating temperature range of -55°C to 155°C.

Q: Are these parts available in alternative packaging formats?

A: Both parts are supplied in Tape & Reel (TR) packaging format as specified in the provided data.