PRF92-P-C-EP-200-SS Equivalent & Substitute Parts

Part Overview

The PRF92-P-C-EP-200-SS is a 2.92mm coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance. This male pin connector features solder contact termination and clamp shield termination, suitable for free hanging in-line cable applications. The part is currently active in production with 1108 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, enabling direct functional replacement in circuit designs and assemblies.

Substiute Parts

PRF92-P-C-EP-200-SS

Samtec Inc.In Stock: 1180PRF92-P-C-EP-200-SS Datasheet

Current PartRFQ

PRF92-P-C-EP-120A-SS

Samtec Inc.In Stock: 853PRF92-P-C-EP-120A-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-135-SS

Samtec Inc.In Stock: 1077PRF92-P-C-EP-135-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-140-SS

Samtec Inc.In Stock: 1151PRF92-P-C-EP-140-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-150-SS

Samtec Inc.In Stock: 822PRF92-P-C-EP-150-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF92-P-C-EP-200-SS are qualified based on strict equivalence of the following parameters:

• Connector Style: 2.92mm (all substitutes maintain this specification)
• Connector Type: Plug, Male Pin (consistent across all alternatives)
• Impedance: 50 Ohms (critical RF parameter)
• Contact Termination: Solder (identical termination method)
• Shield Termination: Clamp (matching shield configuration)
• Mounting Type: Free Hanging (In-Line) (same mechanical mounting)
• Fastening Type: Threaded (identical fastening mechanism)
• Frequency - Max: 40 GHz (equivalent bandwidth capability)
• Center Contact Material: Beryllium Copper (same material specification)
• Body Material: Stainless Steel (identical housing material)
• Center Contact Plating: Gold (matching contact plating)
• Dielectric Material: PTFE (same dielectric specification)
• RoHS Status: ROHS3 Compliant (regulatory equivalence)

All substitute parts are manufactured by Samtec Inc. within the PRF series and maintain full electrical and mechanical compatibility with the primary part number.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain full parametric equivalence with the PRF92-P-C-EP-200-SS across electrical, mechanical, and regulatory specifications. Selection among these alternatives is based on the following factors:

Product Status: All parts are active in production, ensuring continued availability and support.

Regulatory Compliance: All substitute parts carry ROHS3 compliance certification, meeting environmental and hazardous substance restrictions equivalent to the primary part.

Inventory Availability: Selection may be influenced by stock levels. PRF92-P-C-EP-200-SS (1108 units), PRF92-P-C-EP-140-SS (1074 units), and PRF92-P-C-EP-135-SS (1014 units) offer higher availability. PRF92-P-C-EP-150-SS (779 units) and PRF92-P-C-EP-120A-SS (824 units) have lower stock levels.

Packaging Considerations: PRF92-P-C-EP-120A-SS, PRF92-P-C-EP-140-SS, and PRF92-P-C-EP-150-SS are supplied in Bulk packaging. PRF92-P-C-EP-200-SS and PRF92-P-C-EP-135-SS packaging specifications are not designated.

All parts are manufactured by Samtec Inc. within the PRF series and are classified under HTSUS code 8536.69.4010 with ECCN designation EAR99.

Frequently Asked Questions (FAQ)

Q: Can PRF92-P-C-EP-120A-SS be used as a direct replacement for PRF92-P-C-EP-200-SS?

A: Yes. Both parts maintain identical electrical specifications (50 Ohm impedance, 40 GHz maximum frequency), mechanical configuration (2.92mm plug, male pin, solder termination, threaded fastening), and material composition (beryllium copper center contact, stainless steel body, gold plating, PTFE dielectric). Both are ROHS3 compliant and active in production.

Q: What is the difference between these substitute parts?

A: The substitute parts PRF92-P-C-EP-120A-SS, PRF92-P-C-EP-135-SS, PRF92-P-C-EP-140-SS, and PRF92-P-C-EP-150-SS are electrically and mechanically identical to PRF92-P-C-EP-200-SS. Differences exist only in packaging format and current inventory levels. The numeric designations in the part numbers reflect cable gauge or dimensional specifications not provided in the available parameters.

Q: Are there any frequency limitations when substituting these parts?

A: No. All substitute parts support the same maximum frequency of 40 GHz, maintaining full RF performance across the entire operating bandwidth.

Q: Do all substitute parts have the same impedance rating?

A: Yes. All substitute parts are rated at 50 Ohms impedance, ensuring signal integrity and compatibility in RF circuit applications.

Q: What packaging options are available?

A: PRF92-P-C-EP-120A-SS, PRF92-P-C-EP-140-SS, and PRF92-P-C-EP-150-SS are supplied in Bulk packaging. PRF92-P-C-EP-200-SS and PRF92-P-C-EP-135-SS have unspecified packaging designations.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts carry ROHS3 compliance certification, meeting current environmental and hazardous substance regulations.

Q: Which substitute part has the highest inventory availability?

A: PRF92-P-C-EP-200-SS has the highest inventory with 1108 units in stock, followed by PRF92-P-C-EP-140-SS with 1074 units.