PRF92-P-C-EP-150-SS Equivalent & Substitute Parts

Part Overview

The PRF92-P-C-EP-150-SS is a 2.92mm coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance. This male pin connector features solder contact termination and free hanging (in-line) mounting configuration. The part maintains Active product status with 779 units in current inventory stock.

Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the PRF series connector family. Substitute parts enable component sourcing flexibility while maintaining functional compatibility in RF circuit applications.

Substiute Parts

PRF92-P-C-EP-150-SS

Samtec Inc.In Stock: 822PRF92-P-C-EP-150-SS Datasheet

Current PartRFQ

PRF92-P-C-EP-120A-SS

Samtec Inc.In Stock: 853PRF92-P-C-EP-120A-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-135-SS

Samtec Inc.In Stock: 1077PRF92-P-C-EP-135-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-140-SS

Samtec Inc.In Stock: 1151PRF92-P-C-EP-140-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF92-P-C-EP-150-SS are identified within the Samtec PRF series based on matching the following critical parameters:

Electrical Compatibility Parameters:

• Connector Style: 2.92mm
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 40 GHz
• Number of Ports: 1

Mechanical Compatibility Parameters:

• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Center Contact Plating: Gold
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Product Status: Active

All identified substitute parts maintain identical specifications across these parameters, ensuring direct functional equivalence in RF circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts identified for the PRF92-P-C-EP-150-SS maintain identical electrical and mechanical specifications, ensuring direct functional equivalence. Selection among these parts is based on the following engineering criteria:

Product Status and Compliance: All parts maintain Active product status and ROHS3 compliance, confirming ongoing manufacturer support and regulatory conformance for current applications.

Inventory Availability: The PRF92-P-C-EP-140-SS offers the highest current inventory level at 1074 units, followed by PRF92-P-C-EP-135-SS at 1014 units, PRF92-P-C-EP-120A-SS at 824 units, and PRF92-P-C-EP-150-SS at 779 units. Inventory levels support component sourcing decisions based on supply chain requirements.

Packaging Specification: PRF92-P-C-EP-150-SS and PRF92-P-C-EP-140-SS are specified with Bulk packaging. PRF92-P-C-EP-120A-SS is specified with Bulk packaging. PRF92-P-C-EP-135-SS does not specify packaging designation in available data.

Functional Interchangeability: All parts are functionally interchangeable within RF circuit applications operating at frequencies up to 40 GHz with 50 Ohm impedance matching requirements. Selection among equivalent parts does not affect circuit performance or signal integrity.

Frequently Asked Questions (FAQ)

Q: Are all listed substitute parts electrically equivalent to the PRF92-P-C-EP-150-SS?

A: Yes. All substitute parts maintain identical electrical specifications including 2.92mm connector style, 50 Ohm impedance, 40 GHz maximum frequency, and solder contact termination. They are electrically interchangeable in RF applications.

Q: What determines substitution eligibility for 2.92mm coaxial connectors?

A: Substitution eligibility is determined by matching connector style (2.92mm), connector type (Plug, Male Pin), impedance (50 Ohms), contact termination (Solder), shield termination (Clamp), mounting type (Free Hanging In-Line), and dielectric material (PTFE). All listed parts meet these criteria.

Q: Do the substitute parts have the same mechanical dimensions?

A: All substitute parts share identical mechanical specifications including stainless steel body material, beryllium copper center contact material, gold plating, and threaded fastening type. Mechanical compatibility is maintained across all equivalent parts.

Q: Are there packaging differences among the substitute parts?

A: PRF92-P-C-EP-150-SS, PRF92-P-C-EP-120A-SS, and PRF92-P-C-EP-140-SS are specified with Bulk packaging. PRF92-P-C-EP-135-SS does not specify packaging designation in available technical data.

Q: What is the compliance status of these parts?

A: All parts maintain ROHS3 compliance and Active product status, confirming regulatory conformance and ongoing manufacturer support.

Q: Can I use these parts interchangeably in existing circuit designs?

A: Yes. All substitute parts are functionally equivalent and maintain identical electrical and mechanical specifications. Direct substitution does not require circuit design modifications.

Q: Which substitute part has the best current availability?

A: PRF92-P-C-EP-140-SS offers the highest inventory level at 1074 units in current stock.