PRF92-P-C-EP-086E-SS Equivalent & Substitute Parts

Part Overview

The PRF92-P-C-EP-086E-SS is a 2.92mm coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance. This male pin connector features solder contact termination and clamp shield termination, suitable for free hanging in-line cable applications. The part is Active status with 846 units in current inventory stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the PRF series connector family. Alternative models provide functional interchangeability for applications where cable length specifications or packaging requirements differ from the primary part number.

Substiute Parts

PRF92-P-C-EP-086E-SS

Samtec Inc.In Stock: 910PRF92-P-C-EP-086E-SS Datasheet

Current PartRFQ

PRF92-P-C-EP-120A-SS

Samtec Inc.In Stock: 853PRF92-P-C-EP-120A-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-135-SS

Samtec Inc.In Stock: 1077PRF92-P-C-EP-135-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-140-SS

Samtec Inc.In Stock: 1151PRF92-P-C-EP-140-SS Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EP-150-SS

Samtec Inc.In Stock: 822PRF92-P-C-EP-150-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the PRF92-P-C-EP series maintain electrical and mechanical compatibility through identical specifications in the following critical parameters:

Electrical Parameters:

• Connector Style: 2.92mm
• Impedance: 50 Ohms
• Frequency - Max: 40 GHz
• Number of Ports: 1

Mechanical Parameters:

• Connector Type: Plug, Male Pin
• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Housing Color: Silver
• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Center Contact Plating: Gold
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Compliance Parameters:

• Product Status: Active
• RoHS Status: ROHS3 Compliant
• ECCN: EAR99
• HTSUS: 8536.69.4010

The suffix designation in each part number (086E, 120A, 135, 140, 150) indicates cable length specification variations. All listed substitutes share identical electrical performance and physical interface characteristics, differing only in cable assembly length.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status with ROHS3 compliance and EAR99 export classification. Selection between PRF92-P-C-EP-086E-SS and its substitutes is determined by cable length requirements specific to the application.

PRF92-P-C-EP-120A-SS, PRF92-P-C-EP-135-SS, PRF92-P-C-EP-140-SS, and PRF92-P-C-EP-150-SS provide functionally equivalent RF performance with identical electrical specifications and mechanical interface characteristics. The numeric suffix in each part number corresponds to cable assembly length designation.

Current inventory availability across the substitute group ranges from 779 to 1074 units, supporting supply chain flexibility for production requirements.

Frequently Asked Questions (FAQ)

Q: Can PRF92-P-C-EP-120A-SS be used as a direct replacement for PRF92-P-C-EP-086E-SS?

A: Yes. Both connectors maintain identical electrical specifications (50 Ohm impedance, 40 GHz maximum frequency), mechanical interface (2.92mm plug, male pin, solder termination), and material composition (beryllium copper center contact, stainless steel body, gold plating, PTFE dielectric). The difference is cable length specification only.

Q: What determines compatibility between these substitute parts?

A: Compatibility is established through matching parameters: connector style (2.92mm), connector type (plug, male pin), impedance (50 Ohms), contact termination (solder), shield termination (clamp), mounting type (free hanging in-line), fastening type (threaded), maximum frequency (40 GHz), and material specifications (beryllium copper, stainless steel, gold plating, PTFE).

Q: Are all substitute parts ROHS3 compliant?

A: Yes. PRF92-P-C-EP-086E-SS and all listed substitutes (PRF92-P-C-EP-120A-SS, PRF92-P-C-EP-135-SS, PRF92-P-C-EP-140-SS, PRF92-P-C-EP-150-SS) are ROHS3 compliant with EAR99 export classification.

Q: What is the difference between the part numbers?

A: The suffix designation (086E, 120A, 135, 140, 150) indicates cable length specification. All other electrical and mechanical parameters remain identical across the series.

Q: Which substitute part has the highest current inventory?

A: PRF92-P-C-EP-140-SS maintains the highest inventory at 1074 units, followed by PRF92-P-C-EP-135-SS at 1014 units.

Q: Can these connectors be used interchangeably in RF applications up to 40 GHz?

A: Yes. All parts in this group support maximum frequency operation to 40 GHz with 50 Ohm impedance, enabling interchangeable use in RF applications within this frequency range.