PRF92-P-C-EE-405-SD-3 Equivalent & Substitute Parts

Part Overview

The PRF92-P-C-EE-405-SD-3 is a 2.92mm coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance. This male pin connector features solder termination for both center contact and shield, supporting frequencies up to 40 GHz. The connector is constructed with beryllium copper center contact, stainless steel body, and PTFE dielectric material, suitable for RG-405 semi-rigid cable (.085" diameter). The part maintains Active product status and is ROHS3 compliant. Equivalent substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

PRF92-P-C-EE-405-SD-3

Samtec Inc.In Stock: 1066PRF92-P-C-EE-405-SD-3 Datasheet

Current PartRFQ

PRF92-P-C-EE-405-SD-1

Samtec Inc.In Stock: 811PRF92-P-C-EE-405-SD-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PRF92-P-C-EE-405-SD-3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Connector style (2.92mm)
• Impedance (50 Ohms)
• Frequency maximum rating (40 GHz)
• Dielectric material (PTFE)

Mechanical Parameters:

• Connector type (Plug, Male Pin)
• Contact termination method (Solder)
• Shield termination method (Solder)
• Mounting type (Free Hanging In-Line)
• Cable group compatibility (RG-405 .085" Semi Rigid)
• Fastening type (Threaded)

Material & Construction:

• Center contact material (Beryllium Copper)
• Body material (Stainless Steel)
• Center contact plating (Gold)

Compliance:

• RoHS Status (ROHS3 Compliant)

Substitute parts must match all parameters listed above. Variations in packaging or inventory status do not affect substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The PRF92-P-C-EE-405-SD-1 is a direct parametric equivalent to the PRF92-P-C-EE-405-SD-3. Both parts are manufactured by Samtec Inc. and maintain Active product status with ROHS3 compliance. The electrical and mechanical specifications are identical across all critical parameters including connector style, impedance, frequency rating, termination methods, and material composition.

The primary distinction between these parts is packaging configuration. The PRF92-P-C-EE-405-SD-3 is supplied in unspecified packaging, while the PRF92-P-C-EE-405-SD-1 is supplied in Bulk packaging. This difference does not affect electrical or mechanical performance and relates solely to procurement and handling logistics.

Selection between these equivalent parts should be based on packaging requirements and inventory availability. Both parts are suitable for identical RF applications requiring 2.92mm male pin connectors with 50 Ohm impedance and solder termination for RG-405 semi-rigid cable.

Frequently Asked Questions (FAQ)

Q: Can PRF92-P-C-EE-405-SD-1 be used as a direct replacement for PRF92-P-C-EE-405-SD-3?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. They share the same connector style, impedance, frequency rating, termination methods, materials, and plating. The parts are interchangeable for all RF applications.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging. PRF92-P-C-EE-405-SD-3 uses unspecified packaging, while PRF92-P-C-EE-405-SD-1 uses Bulk packaging. All electrical and mechanical parameters are identical.

Q: Are both parts ROHS3 compliant?

A: Yes. Both PRF92-P-C-EE-405-SD-3 and PRF92-P-C-EE-405-SD-1 are ROHS3 compliant with EAR99 export classification and HTSUS code 8536.69.4010.

Q: What cable types are compatible with these connectors?

A: Both connectors are designed for RG-405 semi-rigid cable with .085" diameter. The solder termination method applies to both center contact and shield.

Q: What is the maximum operating frequency for these connectors?

A: Both parts support frequencies up to 40 GHz with 50 Ohm impedance.

Q: Are the materials the same in both parts?

A: Yes. Both parts feature beryllium copper center contact with gold plating, stainless steel body, and PTFE dielectric material.