PRF24-J-C-EP-150-SS Equivalent & Substitute Parts

Part Overview

The PRF24-J-C-EP-150-SS is a 2.4mm (APC-2.4, OS-50) coaxial connector jack manufactured by Samtec Inc. This female socket connector is designed for 50-ohm RF applications with solder termination and operates at frequencies up to 50 GHz. The connector features a stainless steel body with gold-plated beryllium copper center contact and polyetherimide dielectric material. The part is classified as Active product status and is ROHS3 compliant. Equivalent substitute parts are necessary to address inventory availability, supply chain continuity, and project-specific requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

PRF24-J-C-EP-150-SS

Samtec Inc.In Stock: 1158PRF24-J-C-EP-150-SS Datasheet

Current PartRFQ

PRF24-J-C-EP-140B-SS

Samtec Inc.In Stock: 1259PRF24-J-C-EP-140B-SS Datasheet

Parametric EquivalentRFQ

PRF24-J-C-EP-150B-SS

Samtec Inc.In Stock: 981PRF24-J-C-EP-150B-SS Datasheet

Parametric EquivalentRFQ

PRF24-J-C-EP-160-SS

Samtec Inc.In Stock: 786PRF24-J-C-EP-160-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF24-J-C-EP-150-SS are determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish substitution eligibility:

Electrical Parameters:

• Connector Style: 2.4mm (APC-2.4, OS-50)
• Impedance: 50 Ohms
• Frequency - Max: 50 GHz

Mechanical Parameters:

• Connector Type: Jack, Female Socket
• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded

Material & Construction Parameters:

• Center Contact Material: Beryllium Copper
• Center Contact Plating: Gold
• Body Material: Stainless Steel
• Dielectric Material: Polyetherimide (PEI)
• Housing Color: Silver

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Product Status: Active

All substitute parts listed maintain identical values across these parameters, ensuring direct functional and physical compatibility with the main part number.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed—PRF24-J-C-EP-140B-SS, PRF24-J-C-EP-150B-SS, and PRF24-J-C-EP-160-SS—are functionally equivalent to the PRF24-J-C-EP-150-SS based on parametric equivalence. Each part maintains Active product status and ROHS3 compliance, ensuring regulatory conformance and long-term supply viability.

Selection among these parts should be based on inventory availability and project lead-time requirements. PRF24-J-C-EP-140B-SS offers the highest current inventory at 1169 pieces. PRF24-J-C-EP-150B-SS provides 901 pieces in stock. PRF24-J-C-EP-160-SS maintains 738 pieces available.

All parts are manufactured by Samtec Inc. and share identical electrical specifications, mechanical construction, material composition, and termination characteristics. Direct substitution is supported without circuit redesign or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can PRF24-J-C-EP-140B-SS be used as a direct replacement for PRF24-J-C-EP-150-SS?

A: Yes. Both parts are parametrically equivalent 2.4mm (APC-2.4, OS-50) female socket connectors with 50-ohm impedance, solder termination, and identical material specifications. They are electrically and mechanically interchangeable.

Q: What is the difference between PRF24-J-C-EP-150-SS and PRF24-J-C-EP-150B-SS?

A: Both parts share identical electrical and mechanical parameters. The designation difference reflects internal Samtec manufacturing variants. Functionally, they are equivalent for RF applications up to 50 GHz.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. PRF24-J-C-EP-140B-SS, PRF24-J-C-EP-150B-SS, and PRF24-J-C-EP-160-SS are all ROHS3 compliant, matching the compliance status of the main part number.

Q: Can these connectors be used interchangeably in high-frequency applications?

A: Yes. All parts support frequencies up to 50 GHz with 50-ohm impedance and identical dielectric material (Polyetherimide). They are suitable for equivalent RF performance in applications requiring this frequency range.

Q: What termination method is used for these connectors?

A: All parts use solder termination with clamp shield termination. They are designed for free-hanging (in-line) mounting with threaded fastening.

Q: Are there any packaging differences between substitute parts?

A: All substitute parts are supplied in bulk packaging, consistent with the main part number. No packaging format variations exist among the listed equivalents.