PRF10-P-C-VP-047D-SS-B Equivalent & Substitute Parts

Part Overview

The PRF10-P-C-VP-047D-SS-B is a 1.0mm coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance. This male pin connector features solder contact termination and is configured for free hanging (in-line) mounting with a 0.047" semi-rigid cable group. The connector operates at frequencies up to 110 GHz and is constructed with beryllium copper center contacts and stainless steel housing with gold plating. The part maintains Active product status and is ROHS3 compliant. Identifying equivalent substitute parts is necessary when the original packaging configuration is unavailable or when inventory constraints require alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

PRF10-P-C-VP-047D-SS-B

Samtec Inc.In Stock: 831PRF10-P-C-VP-047D-SS-B Datasheet

Current PartRFQ

PRF10-P-C-VP-047D-SS

Samtec Inc.In Stock: 1061PRF10-P-C-VP-047D-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PRF10-P-C-VP-047D-SS-B is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part PRF10-P-C-VP-047D-SS maintains identical specifications in the following key areas:

Electrical Parameters:

• Connector style: 1.0mm
• Impedance: 50 Ohms
• Frequency maximum: 110 GHz
• Contact termination: Solder
• Shield termination: Clamp

Mechanical Parameters:

• Connector type: Plug, Male Pin
• Mounting type: Free Hanging (In-Line)
• Cable group: 0.047" Semi Rigid
• Fastening type: Threaded
• Number of ports: 1

Material Specifications:

• Center contact material: Beryllium Copper
• Center contact plating: Gold
• Body material: Stainless Steel
• Housing color: Silver

Compliance & Status:

• Series: PRF
• Product status: Active
• RoHS status: ROHS3 Compliant
• ECCN: EAR99
• HTSUS: 8536.69.4010

The only difference between the main part and the substitute is the packaging configuration: PRF10-P-C-VP-047D-SS-B is supplied in tape and reel packaging, while PRF10-P-C-VP-047D-SS is supplied in bulk packaging. This distinction does not affect electrical performance, mechanical compatibility, or functional characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both PRF10-P-C-VP-047D-SS-B and PRF10-P-C-VP-047D-SS are Active status products manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on packaging requirements and inventory availability:

PRF10-P-C-VP-047D-SS-B is appropriate for applications requiring tape and reel packaging, typically for automated assembly processes or high-volume production environments where component feeding systems are integrated into manufacturing workflows.

PRF10-P-C-VP-047D-SS is appropriate for applications where bulk packaging is acceptable, including manual assembly, prototyping, or lower-volume production runs. This variant currently maintains higher inventory availability at 1019 pieces compared to 799 pieces for the tape and reel variant.

Both parts satisfy identical electrical performance requirements for RF applications up to 110 GHz with 50 Ohm impedance and are suitable for direct substitution without modification to circuit design or assembly procedures.

Frequently Asked Questions (FAQ)

Q: Are PRF10-P-C-VP-047D-SS-B and PRF10-P-C-VP-047D-SS electrically identical?

A: Yes. Both parts are electrically identical with 50 Ohm impedance, 110 GHz maximum frequency, solder contact termination, and identical material specifications including beryllium copper center contacts with gold plating and stainless steel housing.

Q: What is the only difference between these two part numbers?

A: The packaging configuration. PRF10-P-C-VP-047D-SS-B is supplied in tape and reel packaging, while PRF10-P-C-VP-047D-SS is supplied in bulk packaging. The connector itself is identical.

Q: Can I use PRF10-P-C-VP-047D-SS in place of PRF10-P-C-VP-047D-SS-B in my assembly process?

A: Substitution is possible if your assembly process can accommodate bulk packaging. If your manufacturing equipment requires tape and reel format for automated feeding, the bulk variant is not suitable without process modification.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry EAR99 ECCN classification, and share the same HTSUS code 8536.69.4010.

Q: Which part should I select if both are available?

A: Selection depends on your assembly requirements. Choose PRF10-P-C-VP-047D-SS-B for automated tape and reel feeding systems. Choose PRF10-P-C-VP-047D-SS for manual assembly or when bulk packaging is compatible with your manufacturing process.

Q: Are there any performance differences in RF applications?

A: No. Both parts deliver identical RF performance with 110 GHz frequency capability and 50 Ohm impedance for coaxial cable applications.