PRF06-P-C-EP-335-SS N Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The PRF06-P-C-EP-335-SS is an N Type coaxial connector plug manufactured by Samtec Inc., designed for RF cable applications requiring 50 Ohm impedance matching. This male pin connector features solder termination and free-hanging (in-line) mounting configuration, operating at frequencies up to 18 GHz. The connector is constructed with stainless steel body, beryllium copper center contact with gold plating, and polyetherimide dielectric material. Product status is Active with ROHS3 compliance. Equivalent substitute parts are identified within the PRF06 series where all electrical and mechanical parameters remain identical, differing only in cable group specifications.

Substiute Parts

PRF06-P-C-EP-335-SS

Samtec Inc.In Stock: 902PRF06-P-C-EP-335-SS Datasheet

Current PartRFQ

PRF06-P-C-EP-142-SS

Samtec Inc.In Stock: 961PRF06-P-C-EP-142-SS Datasheet

Parametric EquivalentRFQ

PRF06-P-C-EP-190-SS

Samtec Inc.In Stock: 1140PRF06-P-C-EP-190-SS Datasheet

Parametric EquivalentRFQ

PRF06-P-C-EP-290-SS

Samtec Inc.In Stock: 1152PRF06-P-C-EP-290-SS Datasheet

Parametric EquivalentRFQ

PRF06-P-C-EP-305-SS

Samtec Inc.In Stock: 767PRF06-P-C-EP-305-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the PRF06 series are determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish substitution eligibility:

Mandatory Equivalence Parameters:

• Connector Style: N Type
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Frequency - Max: 18 GHz
• Number of Ports: 1
• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Center Contact Plating: Gold
• Dielectric Material: Polyetherimide (PEI)
• RoHS Status: ROHS3 Compliant

All substitute parts PRF06-P-C-EP-142-SS, PRF06-P-C-EP-190-SS, PRF06-P-C-EP-290-SS, and PRF06-P-C-EP-305-SS maintain identical values across these parameters. Substitution is valid for direct replacement in applications where cable group specifications do not impose additional constraints.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts PRF06-P-C-EP-142-SS, PRF06-P-C-EP-190-SS, PRF06-P-C-EP-290-SS, and PRF06-P-C-EP-305-SS are functionally equivalent to PRF06-P-C-EP-335-SS for RF coaxial connector applications. Each part maintains Active product status and ROHS3 compliance certification. Selection among these equivalents is determined by cable group requirements and inventory availability. PRF06-P-C-EP-190-SS and PRF06-P-C-EP-290-SS offer highest current inventory levels at 1038 and 1047 pieces respectively. All parts are manufactured by Samtec Inc. under identical electrical specifications and material compositions, ensuring direct interchangeability within the PRF06 series.

Frequently Asked Questions (FAQ)

Q: Can PRF06-P-C-EP-335-SS be directly replaced with any of the listed substitute parts?

A: Yes. All substitute parts maintain identical electrical and mechanical parameters including 50 Ohm impedance, N Type connector style, male pin configuration, solder termination, and 18 GHz maximum frequency rating. Direct replacement is valid where cable group specifications do not impose additional constraints.

Q: What distinguishes the substitute parts from the main part number?

A: The substitute parts differ only in cable group designation, which is reflected in the part number suffix. All other parameters including connector type, impedance, termination method, materials, and frequency rating are identical.

Q: Are all parts ROHS3 compliant?

A: Yes. PRF06-P-C-EP-335-SS and all substitute parts (PRF06-P-C-EP-142-SS, PRF06-P-C-EP-190-SS, PRF06-P-C-EP-290-SS, PRF06-P-C-EP-305-SS) are ROHS3 compliant.

Q: What is the maximum operating frequency for these connectors?

A: All parts in this group support maximum frequency of 18 GHz, suitable for RF applications requiring broadband performance.

Q: Are these connectors suitable for solder termination applications?

A: Yes. All parts feature solder contact termination with clamp shield termination, designed for direct soldering to cable assemblies.

Q: What materials are used in the connector construction?

A: All parts use stainless steel body, beryllium copper center contact with gold plating, and polyetherimide (PEI) dielectric material.

Q: Is inventory availability a factor in part selection?

A: Inventory levels vary among substitute parts. PRF06-P-C-EP-190-SS (1038 pcs) and PRF06-P-C-EP-290-SS (1047 pcs) maintain highest stock levels. PRF06-P-C-EP-335-SS has 793 pcs available.