PRF06-P-C-EP-270A-RS N Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The PRF06-P-C-EP-270A-RS is an N Type coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance matching. This male pin connector features solder contact termination and is configured for free hanging, in-line, right angle mounting. The connector operates at frequencies up to 18 GHz and is constructed with beryllium copper center contacts and stainless steel body, both gold-plated and clamp-terminated respectively. The part maintains Active product status and is ROHS3 compliant. Equivalent substitute parts are identified based on matching electrical specifications and mechanical compatibility within the PRF06 series.

Substiute Parts

PRF06-P-C-EP-270A-RS

Samtec Inc.In Stock: 1059PRF06-P-C-EP-270A-RS Datasheet

Current PartRFQ

PRF06-P-C-EP-190-RS

Samtec Inc.In Stock: 881PRF06-P-C-EP-190-RS Datasheet

Parametric EquivalentRFQ

PRF06-P-C-EP-290-RS

Samtec Inc.In Stock: 995PRF06-P-C-EP-290-RS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF06-P-C-EP-270A-RS are identified within the Samtec PRF06 series based on strict electrical and mechanical parameter matching. The substitution logic is based on the following critical parameters that determine functional equivalence:

Electrical Parameters:

• Connector Style: N Type
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 18 GHz
• Number of Ports: 1

Mechanical Parameters:

• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Threaded
• Center Contact Material: Beryllium Copper
• Center Contact Plating: Gold
• Body Material: Stainless Steel
• Dielectric Material: Polyetherimide (PEI)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Product Status: Active

Parts PRF06-P-C-EP-190-RS and PRF06-P-C-EP-290-RS match all critical electrical and mechanical parameters, confirming their status as parametric equivalents suitable for direct substitution in applications requiring N Type 50 Ohm coaxial connectors with solder termination.

Parameter Comparison

Engineering Selection Recommendations

The PRF06-P-C-EP-190-RS and PRF06-P-C-EP-290-RS are direct parametric equivalents to the PRF06-P-C-EP-270A-RS. All three parts maintain Active product status and ROHS3 compliance, ensuring regulatory conformance for current applications. Selection among these three parts should be based on inventory availability and packaging requirements. The PRF06-P-C-EP-270A-RS currently maintains the highest inventory level at 1014 pieces. The PRF06-P-C-EP-290-RS provides 928 pieces in stock, while the PRF06-P-C-EP-190-RS offers 819 pieces. All parts are manufactured by Samtec Inc. and share identical electrical and mechanical specifications within the PRF06 series, confirming full interchangeability for N Type 50 Ohm coaxial connector applications operating up to 18 GHz.

Frequently Asked Questions (FAQ)

Q: Can PRF06-P-C-EP-190-RS and PRF06-P-C-EP-290-RS be used interchangeably with PRF06-P-C-EP-270A-RS?

A: Yes. All three parts are parametric equivalents sharing identical electrical specifications (N Type, 50 Ohms, 18 GHz maximum frequency), mechanical configuration (solder termination, clamp shield termination, free hanging right angle mounting), and material composition (beryllium copper center contacts, stainless steel body, gold plating, polyetherimide dielectric). They are fully interchangeable for RF coaxial connector applications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by matching: connector style (N Type), connector type (Plug, Male Pin), impedance (50 Ohms), maximum frequency (18 GHz), contact termination method (Solder), shield termination method (Clamp), mounting configuration (Free Hanging, In-Line, Right Angle), fastening type (Threaded), and material specifications (beryllium copper center contacts, stainless steel body, gold plating, polyetherimide dielectric).

Q: Are there packaging differences between these substitute parts?

A: The PRF06-P-C-EP-270A-RS packaging is not specified in the provided data. The PRF06-P-C-EP-190-RS is supplied in Bulk packaging. The PRF06-P-C-EP-290-RS packaging is not specified. Packaging differences do not affect electrical or mechanical compatibility.

Q: Do all substitute parts maintain the same compliance certifications?

A: Yes. All three parts are ROHS3 compliant and maintain Active product status, ensuring regulatory conformance and continued manufacturer support.

Q: What is the impedance specification for these connectors?

A: All parts in this substitution group are rated at 50 Ohms impedance, the standard for RF coaxial connector applications.

Q: What is the maximum operating frequency for these connectors?

A: All parts operate at a maximum frequency of 18 GHz, suitable for microwave and high-frequency RF applications.