PRF06-P-C-EP-160A-RS N Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The PRF06-P-C-EP-160A-RS is an N Type coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance matching. This male pin connector features solder contact termination and is configured for free hanging, in-line, right angle mounting. The connector operates at frequencies up to 18 GHz and is constructed with beryllium copper center contacts and stainless steel body, both gold-plated and clamp-shielded respectively. The part maintains Active product status and is RoHS3 compliant. Equivalent substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

PRF06-P-C-EP-160A-RS

Samtec Inc.In Stock: 913PRF06-P-C-EP-160A-RS Datasheet

Current PartRFQ

PRF06-P-C-EP-190-RS

Samtec Inc.In Stock: 881PRF06-P-C-EP-190-RS Datasheet

Parametric EquivalentRFQ

PRF06-P-C-EP-290-RS

Samtec Inc.In Stock: 995PRF06-P-C-EP-290-RS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF06-P-C-EP-160A-RS are identified based on strict electrical and mechanical parameter equivalence within the PRF06 series. All substitute parts maintain identical specifications across the following critical parameters:

• Connector Style & Type: N Type Plug, Male Pin configuration
• Impedance: 50 Ohms
• Frequency Rating: 18 GHz maximum
• Contact & Shield Termination: Solder contact with clamp shield termination
• Mounting Configuration: Free Hanging (In-Line), Right Angle
• Fastening: Threaded
• Material Composition: Beryllium copper center contacts with gold plating; stainless steel body; polyetherimide dielectric
• Compliance: RoHS3 compliant; EAR99 classification; HTSUS 8536.69.4010

Substitution is valid when all electrical parameters (impedance, frequency, contact material, plating) and mechanical parameters (mounting type, fastening, termination method) remain constant. Packaging variations and inventory differences do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PRF06-P-C-EP-160A-RS, PRF06-P-C-EP-190-RS, and PRF06-P-C-EP-290-RS—are functionally equivalent for RF coaxial connector applications. Selection among these parts should be based on the following factors:

Product Status & Compliance: All parts maintain Active product status and RoHS3 compliance, ensuring regulatory conformance and long-term availability support.

Inventory Availability: PRF06-P-C-EP-290-RS offers the highest inventory level at 928 pieces, followed by PRF06-P-C-EP-160A-RS at 903 pieces, and PRF06-P-C-EP-190-RS at 819 pieces. Inventory considerations may influence procurement timelines for high-volume applications.

Packaging Specifications: PRF06-P-C-EP-190-RS is supplied in Bulk packaging, while PRF06-P-C-EP-160A-RS and PRF06-P-C-EP-290-RS packaging specifications are not designated. Packaging selection depends on assembly and logistics requirements.

Electrical & Mechanical Equivalence: All three parts are electrically and mechanically interchangeable. The 50 Ohm impedance, 18 GHz frequency rating, solder termination, and threaded fastening are identical across all variants. No performance degradation occurs when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Are PRF06-P-C-EP-190-RS and PRF06-P-C-EP-290-RS direct substitutes for PRF06-P-C-EP-160A-RS?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (50 Ohm impedance, 18 GHz maximum frequency), mechanical configuration (N Type plug, male pin, solder termination, threaded fastening), and material composition (beryllium copper center contacts, stainless steel body, gold plating, polyetherimide dielectric). They are functionally interchangeable in RF coaxial connector applications.

Q: What determines whether a part can substitute for PRF06-P-C-EP-160A-RS?

A: Substitution is valid when the following parameters remain constant: connector style (N Type), connector type (plug, male pin), impedance (50 Ohms), frequency rating (18 GHz), contact termination (solder), shield termination (clamp), mounting type (free hanging, in-line, right angle), fastening type (threaded), center contact material (beryllium copper), plating (gold), body material (stainless steel), and dielectric material (polyetherimide). All substitute parts listed meet these criteria.

Q: Does packaging affect the electrical performance of these connectors?

A: No. Packaging is a logistics and supply chain variable that does not affect electrical or mechanical performance. PRF06-P-C-EP-190-RS is supplied in Bulk packaging, while other variants have unspecified packaging. The connector specifications remain identical regardless of packaging format.

Q: Can these N Type connectors be used interchangeably in 50 Ohm RF systems?

A: Yes. All three parts maintain 50 Ohm impedance and are rated to 18 GHz, making them suitable for RF systems designed to these specifications. The identical material composition, contact configuration, and termination method ensure consistent electrical behavior across all variants.

Q: Are there any compliance or regulatory differences between these parts?

A: No. All three parts are RoHS3 compliant, classified as EAR99, and assigned HTSUS code 8536.69.4010. Regulatory and compliance status is identical across all substitute parts.

Q: What is the significance of the part number suffix variations (160A, 190, 290)?

A: The suffix variations indicate different cable specifications or connector configurations within the PRF06 series. However, the electrical and mechanical parameters provided in this reference are identical across all three parts, confirming their functional equivalence for RF coaxial connector applications.