PRF01-P-C-EP-335A-SS-1 SMA Coaxial Connector Equivalent & Substitute Parts

Part Overview

The PRF01-P-C-EP-335A-SS-1 is an SMA connector plug with male pin configuration manufactured by Samtec Inc. This component operates as a free-hanging, in-line solder-terminated coaxial connector rated for 50 Ohms impedance and frequencies up to 18 GHz. The part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the PRF series, enabling component interchangeability for design flexibility and supply chain continuity.

Substiute Parts

PRF01-P-C-EP-335A-SS-1

Samtec Inc.In Stock: 1037PRF01-P-C-EP-335A-SS-1 Datasheet

Current PartRFQ

PRF01-P-C-EP-120C-SS

Samtec Inc.In Stock: 824PRF01-P-C-EP-120C-SS Datasheet

Parametric EquivalentRFQ

PRF01-P-C-EP-200-SS

Samtec Inc.In Stock: 1135PRF01-P-C-EP-200-SS Datasheet

Parametric EquivalentRFQ

PRF01-P-C-EP-290-SS-1

Samtec Inc.In Stock: 1088PRF01-P-C-EP-290-SS-1 Datasheet

Parametric EquivalentRFQ

PRF01-P-C-EP-335A-SS

Samtec Inc.In Stock: 1205PRF01-P-C-EP-335A-SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF01-P-C-EP-335A-SS-1 are identified based on strict electrical and mechanical parameter equivalence within the Samtec PRF series. The following parameters determine substitution eligibility:

Critical Equivalence Parameters:

• Connector Style: SMA
• Connector Type: Plug, Male Pin
• Contact Termination: Solder
• Shield Termination: Clamp
• Impedance: 50 Ohms
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Frequency - Max: 18 GHz
• Number of Ports: 1
• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Center Contact Plating: Gold
• Dielectric Material: PTFE
• Product Status: Active
• RoHS Status: ROHS3 Compliant

All identified substitute parts maintain these parameters identically. Variations in part numbering reflect cable length specifications or packaging configurations that do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the PRF01-P-C-EP-335A-SS-1. Selection among these parts is based on the following criteria:

Product Status and Compliance: All substitute parts carry Active product status and ROHS3 compliance certification, meeting current regulatory requirements for electronic component deployment.

Supply Chain Availability: Inventory levels vary across substitute part numbers. PRF01-P-C-EP-335A-SS maintains the highest inventory at 1095 pieces, followed by PRF01-P-C-EP-200-SS at 1029 pieces. Selection based on availability supports procurement continuity.

Packaging Configuration: PRF01-P-C-EP-335A-SS is specified with Bulk packaging, while other variants do not specify packaging type. This distinction may influence logistics and handling procedures but does not affect electrical performance.

Part Number Variants: Differences in part numbering (120C, 200, 290-SS-1, 335A-SS, 335A-SS-1) reflect cable length or connector configuration specifications. These variants are interchangeable within the PRF series for applications requiring 50 Ohm SMA male plug connectors with solder termination.

Frequently Asked Questions (FAQ)

Q: Can PRF01-P-C-EP-120C-SS be used as a direct replacement for PRF01-P-C-EP-335A-SS-1?

A: Yes. Both parts maintain identical electrical and mechanical parameters including SMA connector style, male pin configuration, 50 Ohm impedance, 18 GHz frequency rating, solder contact termination, and clamp shield termination. The part number variation reflects cable length specification only.

Q: What determines compatibility between these SMA connector substitutes?

A: Compatibility is determined by equivalence in connector style (SMA), connector type (Plug, Male Pin), impedance (50 Ohms), frequency rating (18 GHz), termination methods (Solder contact, Clamp shield), mounting configuration (Free Hanging In-Line), and material specifications (Beryllium Copper center contact, Stainless Steel body, Gold plating, PTFE dielectric).

Q: Are there packaging differences between PRF01-P-C-EP-335A-SS and PRF01-P-C-EP-335A-SS-1?

A: PRF01-P-C-EP-335A-SS is specified with Bulk packaging. PRF01-P-C-EP-335A-SS-1 does not specify packaging type in the provided data. Both parts are electrically and mechanically identical.

Q: Do all substitute parts meet current regulatory compliance?

A: Yes. All substitute parts listed carry ROHS3 compliance certification and EAR99 export classification, meeting current regulatory requirements for electronic component use.

Q: Which substitute part offers the best supply availability?

A: PRF01-P-C-EP-335A-SS maintains the highest inventory level at 1095 pieces in stock, followed by PRF01-P-C-EP-200-SS at 1029 pieces.

Q: Can these connectors be used interchangeably in RF applications up to 18 GHz?

A: Yes. All substitute parts maintain the 18 GHz maximum frequency specification and 50 Ohm impedance required for RF applications. Electrical performance is equivalent across all listed variants.