SMA Connector Plug PRF01-P-C-EP-335A-SS Equivalent & Substitute Parts

Part Overview

The PRF01-P-C-EP-335A-SS is an SMA coaxial connector plug manufactured by Samtec Inc., designed for RF applications requiring 50 Ohm impedance matching. This male pin connector features solder contact termination and free hanging (in-line) mounting configuration, suitable for cable assembly applications up to 18 GHz. The connector is ROHS3 compliant and maintains active product status with 1095 units in current inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the PRF series, enabling component interchangeability for procurement flexibility and supply chain continuity.

Substiute Parts

PRF01-P-C-EP-335A-SS

Samtec Inc.In Stock: 1205PRF01-P-C-EP-335A-SS Datasheet

Current PartRFQ

PRF01-P-C-EP-120C-SS

Samtec Inc.In Stock: 824PRF01-P-C-EP-120C-SS Datasheet

Parametric EquivalentRFQ

PRF01-P-C-EP-200-SS

Samtec Inc.In Stock: 1135PRF01-P-C-EP-200-SS Datasheet

Parametric EquivalentRFQ

PRF01-P-C-EP-290-SS-1

Samtec Inc.In Stock: 1088PRF01-P-C-EP-290-SS-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PRF01-P-C-EP-335A-SS are identified within the Samtec PRF series based on strict parametric equivalence. All substitute parts maintain identical electrical and mechanical specifications across the following critical parameters: SMA connector style, male pin plug configuration, 50 Ohm impedance, solder contact termination, clamp shield termination, free hanging in-line mounting, threaded fastening, 18 GHz maximum frequency, single port configuration, beryllium copper center contact material, stainless steel body construction, gold center contact plating, and PTFE dielectric material. All substitute parts retain active product status and ROHS3 compliance. Substitution is valid when these core parameters remain unchanged, regardless of cable length designation differences reflected in the part number suffix.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the PRF01-P-C-EP-335A-SS. Selection among equivalent parts is determined by inventory availability and procurement requirements. All substitute parts retain active product status and ROHS3 compliance, ensuring regulatory conformance for applications requiring environmental and hazardous substance restrictions. The PRF01-P-C-EP-200-SS offers highest current inventory at 1029 units. The PRF01-P-C-EP-120C-SS provides the lowest inventory option at 728 units. Component selection should be based on supply chain requirements and project timelines rather than electrical performance, as all parts are parametrically equivalent for RF applications operating at frequencies up to 18 GHz with 50 Ohm impedance matching.

Frequently Asked Questions (FAQ)

Q: What determines if a part is a valid substitute for PRF01-P-C-EP-335A-SS?

A: Valid substitutes must maintain identical specifications across all critical parameters: SMA connector style, male pin plug type, 50 Ohm impedance, solder contact termination, clamp shield termination, free hanging in-line mounting, threaded fastening, 18 GHz maximum frequency, beryllium copper center contact material, stainless steel body, gold center contact plating, and PTFE dielectric material. All substitute parts listed meet these requirements.

Q: Are there electrical performance differences between the main part and substitute parts?

A: No. All listed parts are parametrically equivalent and maintain identical electrical specifications for RF applications. Differences in part numbers reflect cable length designations only and do not affect connector electrical characteristics or mechanical compatibility.

Q: Can substitute parts be used interchangeably in existing designs?

A: Yes. All substitute parts are mechanically and electrically compatible with designs specified for PRF01-P-C-EP-335A-SS. The connector interface, impedance matching, frequency response, and termination methods are identical across all listed parts.

Q: What is the significance of the part number suffix variations?

A: Part number suffixes (such as -335A, -120C, -200, -290-SS-1) indicate cable length or configuration variants within the PRF series. These designations do not affect the core connector specifications or substitution eligibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8536.69.4010) as the main part.

Q: Which substitute part should be selected for new procurement?

A: Selection should be based on current inventory availability and project delivery requirements. PRF01-P-C-EP-200-SS offers the highest inventory level at 1029 units, while all parts maintain identical electrical and mechanical performance.