PRF01-P-C-EP-160A-RS SMA Connector Plug Equivalent & Substitute Parts

Part Overview

The PRF01-P-C-EP-160A-RS is an SMA connector plug manufactured by Samtec Inc., designed for coaxial RF applications requiring 50 Ohm impedance. This male pin connector features solder contact termination and is configured for free hanging, in-line, right angle mounting. The component is currently in active product status with 665 units available in new original inventory.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when alternative packaging configurations are required, or when inventory constraints necessitate component alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

PRF01-P-C-EP-160A-RS

Samtec Inc.In Stock: 696PRF01-P-C-EP-160A-RS Datasheet

Current PartRFQ

PRF01-P-C-EP-335A-RS

Samtec Inc.In Stock: 784PRF01-P-C-EP-335A-RS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PRF01-P-C-EP-160A-RS is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Impedance: 50 Ohms (mandatory match)
• Frequency - Max: 18 GHz (mandatory match)
• Number of Ports: 1 (mandatory match)

Mechanical Parameters:

• Connector Style: SMA (mandatory match)
• Connector Type: Plug, Male Pin (mandatory match)
• Mounting Type: Free Hanging (In-Line), Right Angle (mandatory match)
• Fastening Type: Threaded (mandatory match)

Material & Construction Parameters:

• Contact Termination: Solder (mandatory match)
• Shield Termination: Clamp (mandatory match)
• Center Contact Material: Beryllium Copper (mandatory match)
• Body Material: Stainless Steel (mandatory match)
• Center Contact Plating: Gold (mandatory match)
• Dielectric Material: Polytetrafluoroethylene (PTFE) (mandatory match)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (mandatory match)
• Product Status: Active (mandatory match)

The substitute part PRF01-P-C-EP-335A-RS meets all mandatory electrical, mechanical, material, and compliance parameters. The only difference is packaging configuration (Bulk versus standard packaging), which does not affect functional or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

PRF01-P-C-EP-160A-RS is the primary specification. This part is in active product status and maintains full ROHS3 compliance. It is suitable for direct component selection in RF coaxial applications requiring 50 Ohm impedance up to 18 GHz.

PRF01-P-C-EP-335A-RS is a parametric equivalent substitute. This part maintains identical electrical performance, mechanical configuration, material composition, and regulatory compliance. The difference in packaging (Bulk configuration) does not affect functional performance or electrical characteristics. This substitute is appropriate when the primary part number is unavailable or when bulk packaging is preferred for procurement efficiency.

Both parts are manufactured by Samtec Inc. and are currently in active product status with available inventory. Selection between these two part numbers should be based on packaging requirements and inventory availability rather than electrical or mechanical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can PRF01-P-C-EP-335A-RS be used as a direct replacement for PRF01-P-C-EP-160A-RS?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (50 Ohm impedance, 18 GHz maximum frequency), mechanical configuration (SMA plug, male pin, free hanging right angle), material composition (beryllium copper center contact, stainless steel body, gold plating, PTFE dielectric), and regulatory compliance (ROHS3). The only difference is packaging configuration.

Q: What is the difference between these two part numbers?

A: The PRF01-P-C-EP-160A-RS is supplied in standard packaging, while the PRF01-P-C-EP-335A-RS is supplied in bulk packaging. This difference affects procurement and handling but does not alter electrical or mechanical performance.

Q: Are both parts currently available?

A: Yes. PRF01-P-C-EP-160A-RS has 665 units in new original inventory. PRF01-P-C-EP-335A-RS has 708 units in new original inventory.

Q: Do these connectors meet RoHS requirements?

A: Yes. Both PRF01-P-C-EP-160A-RS and PRF01-P-C-EP-335A-RS are ROHS3 compliant.

Q: What is the maximum operating frequency for these connectors?

A: Both parts are rated for a maximum frequency of 18 GHz.

Q: Are the solder termination specifications identical between these parts?

A: Yes. Both parts feature solder contact termination with clamp shield termination, identical center contact material (beryllium copper), and identical plating (gold).