PRF00-J-C-EE-047A-RD SMP Coaxial Connector Equivalent & Substitute Parts

Part Overview

The PRF00-J-C-EE-047A-RD is an SMP Connector Jack with female socket configuration manufactured by Samtec Inc. This coaxial RF connector operates at 50 Ohms impedance with a maximum frequency rating of 40 GHz and features solder termination for both contact and shield. The connector is designed for free hanging (in-line) applications with snap-on fastening. The part maintains Active product status with 822 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

PRF00-J-C-EE-047A-RD

Samtec Inc.In Stock: 856PRF00-J-C-EE-047A-RD Datasheet

Current PartRFQ

PRF00-J-C-EE-085A-SD

Samtec Inc.In Stock: 1010PRF00-J-C-EE-085A-SD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PRF00-J-C-EE-047A-RD is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Impedance: 50 Ohms
• Frequency - Max: 40 GHz
• Connector Type: Jack, Female Socket

Mechanical Parameters:

• Connector Style: SMP
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Snap-On
• Contact Termination: Solder
• Shield Termination: Solder

Material & Finish Parameters:

• Center Contact Material: Beryllium Copper
• Body Material: Beryllium Copper
• Body Finish: Gold
• Center Contact Plating: Gold
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Series: PRF

Substitute parts must match all parameters listed above. Variations in part numbering within the PRF series reflect cable group or connector length specifications that do not affect core electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both PRF00-J-C-EE-047A-RD and PRF00-J-C-EE-085A-SD are Active status products manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these equivalent parts is based on the following engineering criteria:

Inventory Availability: PRF00-J-C-EE-085A-SD currently maintains higher inventory (948 units) compared to PRF00-J-C-EE-047A-RD (822 units), supporting supply chain continuity for high-volume procurement requirements.

Compliance & Certification: Both parts carry identical RoHS3 compliance status, ECCN classification (EAR99), and HTSUS code (8536.69.4010), ensuring regulatory equivalence for export and procurement documentation.

Electrical & Mechanical Equivalence: All critical parameters including impedance, frequency rating, connector geometry, termination method, and material composition are identical. Both parts are suitable for direct substitution in 50 Ohm RF applications operating up to 40 GHz.

Packaging Consideration: PRF00-J-C-EE-047A-RD is specified with Bulk packaging. PRF00-J-C-EE-085A-SD packaging specification is not provided in available data. Verify packaging requirements with supplier documentation before final selection.

Selection should prioritize inventory availability and packaging compatibility with assembly requirements.

Frequently Asked Questions (FAQ)

Q: Can PRF00-J-C-EE-085A-SD be used as a direct replacement for PRF00-J-C-EE-047A-RD?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (50 Ohms, 40 GHz maximum frequency), mechanical configuration (SMP Jack, Female Socket, Free Hanging, Snap-On), material composition (Beryllium Copper with Gold plating), and dielectric properties (PTFE). Direct substitution is supported without circuit modification.

Q: What is the difference between these two part numbers?

A: The part number suffix variation (047A-RD versus 085A-SD) reflects differences in cable group or connector length specifications. These variations do not affect core electrical or mechanical compatibility. Both parts maintain identical impedance, frequency rating, connector type, and termination method.

Q: Are both parts RoHS compliant?

A: Yes. Both PRF00-J-C-EE-047A-RD and PRF00-J-C-EE-085A-SD are ROHS3 Compliant and carry identical regulatory classification (ECCN: EAR99, HTSUS: 8536.69.4010).

Q: What is the maximum operating frequency for these connectors?

A: Both parts are rated for a maximum frequency of 40 GHz, supporting high-frequency RF applications including microwave and millimeter-wave systems.

Q: What termination method is used for these connectors?

A: Both parts utilize solder termination for both the center contact and shield. This method is suitable for PCB assembly and cable integration applications requiring permanent mechanical and electrical connections.

Q: What materials are used in the connector construction?

A: Both parts feature Beryllium Copper for the center contact and body material with Gold plating on both the body finish and center contact. The dielectric material is Polytetrafluoroethylene (PTFE), providing low-loss RF performance.

Q: What is the fastening mechanism?

A: Both connectors use Snap-On fastening, providing secure mating without threaded coupling. This design supports rapid connection and disconnection in test and production environments.

Q: Are these connectors suitable for high-volume production?

A: Yes. Both parts are Active status products with substantial inventory availability (822 and 948 units respectively), supporting high-volume procurement and production schedules.