PRA.M1.0GL.LC65G Equivalent & Substitute Parts

Part Overview

The PRA.M1.0GL.LC65G is a 10-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for free-hanging inline applications requiring push-pull detent lock fastening. The part is currently active in production with 1021 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to availability constraints, supply chain considerations, or application-specific requirements within the allowed parameter ranges.

Substiute Parts

PRA.M1.0GL.LC65G

LEMOIn Stock: 1046PRA.M1.0GL.LC65G Datasheet

Current PartRFQ

K11MA7-P10LCC0-6570

ODUIn Stock: 1195K11MA7-P10LCC0-6570 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PRA.M1.0GL.LC65G is determined by strict equivalence across the following critical parameters:

• Connector type: Receptacle with female sockets
• Number of positions: 10
• Termination method: Solder cup
• Fastening mechanism: Push-pull detent lock
• Mounting configuration: Free hanging inline
• Shell material: Polysulfone (PSU)
• Contact finish: Gold plating on mating surfaces
• Ingress protection rating: IP50
• Cable opening range: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Compliance certifications: ROHS3 and REACH status

The identified substitute part K11MA7-P10LCC0-6570 (ODU MEDI-SNAP®) meets all critical substitution criteria within the allowed electrical and mechanical parameter ranges for this product category.

Parameter Comparison

Engineering Selection Recommendations

Both the PRA.M1.0GL.LC65G and K11MA7-P10LCC0-6570 maintain active product status and full compliance with ROHS3 and REACH regulatory requirements. The substitute part operates within the specified electrical and mechanical parameter ranges established for this connector category. Selection between these parts should be based on availability, supply chain lead times, and application-specific environmental requirements within the stated operating temperature and current rating specifications.

Frequently Asked Questions (FAQ)

Q: Can K11MA7-P10LCC0-6570 be used as a direct replacement for PRA.M1.0GL.LC65G?

A: Yes, within the specified parameter ranges. Both connectors share identical mechanical interfaces, termination methods, and ingress protection ratings. The substitute part operates at 2.75A versus 3A and supports temperatures to 120°C versus 150°C, which are within acceptable ranges for most applications in the specified categories.

Q: What are the key differences between these two parts?

A: The primary differences are current rating (3A vs. 2.75A) and maximum operating temperature (150°C vs. 120°C). Both parts maintain equivalent shell materials, contact finishes, and mechanical configurations.

Q: Are both parts suitable for automotive, industrial, and medical applications?

A: Both parts are rated for industrial and medical applications. The LEMO part is additionally rated for automotive and testing equipment applications. Application suitability should be confirmed against specific end-use requirements.

Q: What is the packaging difference?

A: The LEMO part is supplied in standard packaging, while the ODU substitute is supplied in bulk packaging. This does not affect connector functionality or compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes, both parts are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for their respective markets.