PR1001G-T Equivalent & Substitute Parts

Part Overview

The PR1001G-T is a general-purpose rectifier diode manufactured by Diodes Incorporated, rated for 50 V DC reverse voltage and 1 A average rectified current in a through-hole DO-41 package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and package specifications align with the original component, enabling direct replacement in circuit applications without design modification.

Key Parameters

Parameter	Value
Voltage - DC Reverse (Vr) (Max)	50 V
Current - Average Rectified (Io)	1 A
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 1 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)
Reverse Recovery Time (trr)	150 ns
Current - Reverse Leakage @ Vr	5 µA @ 50 V
Capacitance @ Vr, F	15pF @ 4V, 1MHz
Mounting Type	Through Hole
Package / Case	DO-204AL, DO-41, Axial
Operating Temperature - Junction	-65°C ~ 150°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the PR1001G-T are grouped based on the following critical parameters that determine functional equivalence:

Primary Substitution Criteria:

Voltage - DC Reverse (Vr) (Max): 50 V
Current - Average Rectified (Io): 1 A
Mounting Type: Through Hole
Package / Case: DO-204AL, DO-41, or Axial configurations

Secondary Compatibility Factors:

Voltage - Forward (Vf) (Max) @ If: ≤ 1.3 V @ 1 A
Current - Reverse Leakage @ Vr: ≤ 5 µA @ 50 V
Operating Temperature - Junction: Minimum -55°C to maximum ≥ 150°C
RoHS3 Compliance and REACH Unaffected status

Substitutes are classified into two categories: Direct Equivalents (matching fast recovery speed characteristics) and Compatible Alternatives (standard recovery speed, suitable for non-critical timing applications). All listed substitutes maintain the 50 V / 1 A electrical specification and through-hole mounting requirement.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vr (Max)	Io	Vf (Max) @ If	Speed	trr	Ir @ Vr	Package	Temp Range	Product Status
PR1001G-T	Diodes Incorporated	50 V	1 A	1.3 V @ 1 A	Fast Recovery ≤ 500ns	150 ns	5 µA @ 50 V	DO-41	-65°C ~ 150°C	Active
RGP10A	Fairchild Semiconductor	50 V	1 A	1.3 V @ 1 A	Fast Recovery ≤ 500ns	150 ns	5 µA @ 50 V	DO-41	-65°C ~ 175°C	Active
1N4001-E3/54	Vishay General Semiconductor	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	—	5 µA @ 50 V	DO-204AL (DO-41)	-55°C ~ 150°C	Active
1N4001-E3/73	Vishay General Semiconductor	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	—	5 µA @ 50 V	DO-204AL (DO-41)	-55°C ~ 150°C	Active
1N4001-TP	Micro Commercial Co	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	2 µs	5 µA @ 50 V	DO-41	-55°C ~ 150°C	Not For New Designs
1N4001G	Taiwan Semiconductor Corporation	50 V	1 A	1.0 V @ 1 A	Standard Recovery >500ns	—	5 µA @ 50 V	DO-204AL (DO-41)	-55°C ~ 150°C	Active
1N4001GP-E3/54	Vishay General Semiconductor	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	2 µs	5 µA @ 50 V	DO-204AL (DO-41)	-65°C ~ 175°C	Active
1N4001GP-E3/73	Vishay General Semiconductor	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	2 µs	5 µA @ 50 V	DO-204AL (DO-41)	-65°C ~ 175°C	Active
1N4001RLG	onsemi	50 V	1 A	1.1 V @ 1 A	Standard Recovery >500ns	—	10 µA @ 50 V	Axial	-65°C ~ 175°C	Not For New Designs
1N4933-E3/54	Vishay General Semiconductor	50 V	1 A	1.2 V @ 1 A	Fast Recovery ≤ 500ns	200 ns	5 µA @ 50 V	DO-204AL (DO-41)	-50°C ~ 150°C	Active
1N4933G	Good-Ark Semiconductor	50 V	1 A	1.2 V @ 1 A	Fast Recovery ≤ 500ns	200 ns	5 µA @ 50 V	DO-204AL (DO-41)	-55°C ~ 125°C	Active

Engineering Selection Recommendations

For Active Product Status Applications:

The RGP10A (Fairchild Semiconductor) provides the closest electrical and thermal match to the PR1001G-T, maintaining identical fast recovery speed characteristics (≤ 500ns, 150 ns trr) and forward voltage specification (1.3 V @ 1 A). The RGP10A extends the operating temperature range to -65°C ~ 175°C, providing enhanced thermal margin. Both components are RoHS3 compliant and REACH unaffected.

The 1N4933-E3/54 and 1N4933G are fast recovery alternatives with comparable reverse recovery time (200 ns) and forward voltage (1.2 V @ 1 A). Both maintain the 50 V / 1 A specification and are Active status products. The 1N4933-E3/54 offers extended temperature range (-50°C ~ 150°C) and higher inventory availability (14,607 pcs).

For Standard Recovery Applications:

The 1N4001-E3/54, 1N4001-E3/73, and 1N4001G are standard recovery alternatives suitable for applications where switching speed is not critical. These components feature lower forward voltage (1.0–1.1 V @ 1 A) and are Active status products. The 1N4001G (Taiwan Semiconductor Corporation) offers the lowest forward voltage (1.0 V @ 1 A) with Active product status.

The 1N4001GP-E3/54 and 1N4001GP-E3/73 (Vishay SUPERECTIFIER® series) provide extended temperature range (-65°C ~ 175°C) and are Active status products, suitable for demanding thermal environments.

Not Recommended for New Designs:

The 1N4001-TP (Micro Commercial Co) and 1N4001RLG (onsemi) are marked "Not For New Designs" and should be used only for legacy system maintenance or repair applications.

Frequently Asked Questions (FAQ)

Q: Can the RGP10A directly replace the PR1001G-T?

A: Yes. The RGP10A maintains identical electrical specifications (50 V, 1 A, fast recovery ≤ 500ns, 150 ns trr, 1.3 V Vf @ 1 A) and through-hole DO-41 package configuration. The RGP10A extends the operating temperature range to -65°C ~ 175°C, providing additional thermal capability.

Q: What is the difference between fast recovery and standard recovery diodes in this comparison?

A: Fast recovery diodes (PR1001G-T, RGP10A, 1N4933-E3/54, 1N4933G) have reverse recovery time ≤ 500ns and are suitable for high-frequency switching applications. Standard recovery diodes (1N4001 series) have reverse recovery time >500ns and are suitable for low-frequency rectification where switching speed is not critical. Selection depends on circuit operating frequency requirements.

Q: Are all substitute parts RoHS3 compliant?

A: All listed substitute parts are RoHS3 compliant and REACH unaffected, matching the compliance status of the PR1001G-T.

Q: Can I use the 1N4001-TP as a substitute?

A: The 1N4001-TP is electrically compatible (50 V, 1 A, standard recovery) but is marked "Not For New Designs." Use only for legacy system maintenance or repair where the original part is no longer available.

Q: What is the significance of the package designation DO-204AL versus DO-41?

A: DO-204AL and DO-41 are equivalent package designations for the same through-hole axial lead component. Both refer to the same physical form factor and pin configuration. Substitutes using either designation are mechanically and electrically interchangeable.

Q: Which substitute offers the lowest forward voltage drop?

A: The 1N4001G (Taiwan Semiconductor Corporation) offers the lowest forward voltage at 1.0 V @ 1 A. This reduces power dissipation in applications with continuous current flow. However, this part uses standard recovery speed (>500ns), suitable only for non-switching applications.

Q: What is the temperature range consideration for substitute selection?

A: The PR1001G-T operates from -65°C to 150°C. Substitutes with extended ranges (e.g., RGP10A, 1N4001GP-E3/54, 1N4001GP-E3/73 at -65°C ~ 175°C) provide additional margin for high-temperature environments. The 1N4933G has a reduced upper limit (-55°C ~ 125°C) and is suitable only for applications within this narrower range.

Q: Is reverse leakage current a critical parameter for substitution?

A: Reverse leakage current is specified at 5 µA @ 50 V for most substitutes, matching the PR1001G-T. The 1N4001RLG specifies 10 µA @ 50 V, which is acceptable for most applications but represents higher leakage. This parameter becomes critical in high-impedance circuits or precision analog applications.

Q: What packaging options are available for the substitute parts?

A: Substitute parts are available in Tape & Reel (TR), Cut Tape (CT), Bulk, and Digi-Reel® packaging. The PR1001G-T is supplied in Tape & Reel. Packaging selection affects procurement and assembly processes but does not affect electrical or mechanical compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message