PR1001GL-T Equivalent & Substitute Parts

Part Overview

The PR1001GL-T is a general-purpose rectifier diode manufactured by Diodes Incorporated, rated for 50 V DC reverse voltage and 1 A average rectified current in a DO-41 through-hole package. This part is classified as obsolete, which necessitates identification of active equivalent and substitute components for ongoing production and maintenance applications. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts provide functional compatibility within defined parameter tolerances for this rectifier diode category.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	50	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.3	V @ 1 A
Reverse Recovery Time (trr)	150	ns
Current - Reverse Leakage @ Vr	5	µA @ 50 V
Mounting Type	Through Hole	-
Package / Case	DO-204AL, DO-41, Axial	-
Operating Temperature - Junction	-65 to 150	°C
Technology	Standard	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution of the PR1001GL-T is determined by the following critical parameters:

Electrical Compatibility Requirements:

Voltage - DC Reverse (Vr) (Max): 50 V minimum
Current - Average Rectified (Io): 1 A minimum
Voltage - Forward (Vf) (Max) @ If: 1.3 V or lower at 1 A
Current - Reverse Leakage @ Vr: 5 µA or lower at 50 V

Mechanical Compatibility Requirements:

Mounting Type: Through Hole
Package / Case: DO-204AL, DO-41, or Axial configurations

Environmental & Compliance Requirements:

Operating Temperature - Junction: -65°C to 150°C minimum range
RoHS Status: ROHS3 Compliant
Technology: Standard rectifier diode

Substitute parts are grouped into two categories: direct equivalents (PR1001G-T from Diodes Incorporated) and cross-manufacturer alternatives (RGP10A series, 1N4001 series variants) that meet or exceed the specified electrical and mechanical parameters. Parts with extended temperature ranges (-65°C to 175°C) or improved forward voltage characteristics (1.1 V or lower) provide enhanced performance margins while maintaining functional compatibility.

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ 1A [V]	trr [ns]	Ir @ 50V [µA]	Package	Temp Range [°C]	Product Status	RoHS
PR1001GL-T	Diodes Incorporated	50	1	1.3	150	5	DO-41	-65 to 150	Obsolete	ROHS3
PR1001G-T	Diodes Incorporated	50	1	1.3	150	5	DO-41	-65 to 150	Active	ROHS3
RGP10A	Fairchild Semiconductor	50	1	1.3	150	5	DO-41	-65 to 175	Active	Undefined
RGP10A-E3/54	Vishay General Semiconductor	50	1	1.3	150	5	DO-204AL	-65 to 175	Active	ROHS3
1N4001-E3/54	Vishay General Semiconductor	50	1	1.1	N/A	5	DO-204AL	-55 to 150	Active	ROHS3
1N4001-E3/73	Vishay General Semiconductor	50	1	1.1	N/A	5	DO-204AL	-55 to 150	Active	ROHS3
1N4001-TP	Micro Commercial Co	50	1	1.1	2000	5	DO-41	-55 to 150	Not For New Designs	ROHS3
1N4001G	Taiwan Semiconductor Corporation	50	1	1.0	N/A	5	DO-204AL	-55 to 150	Active	ROHS3
1N4001GP-E3/54	Vishay General Semiconductor	50	1	1.1	2000	5	DO-204AL	-65 to 175	Active	ROHS3
1N4001GP-E3/73	Vishay General Semiconductor	50	1	1.1	2000	5	DO-204AL	-65 to 175	Active	ROHS3
1N4001RLG	onsemi	50	1	1.1	N/A	10	Axial	-65 to 175	Not For New Designs	ROHS3

Engineering Selection Recommendations

Primary Recommendation - Direct Equivalent:

PR1001G-T (Diodes Incorporated) is the direct active equivalent to the obsolete PR1001GL-T. This part maintains identical electrical specifications, matching forward voltage, reverse recovery time, and reverse leakage characteristics. The PR1001G-T differs only in product status (Active) and packaging format (Tape & Reel), making it the preferred replacement for direct substitution in existing designs.

Secondary Recommendations - Cross-Manufacturer Alternatives:

RGP10A-E3/54 (Vishay General Semiconductor) provides equivalent electrical performance with extended operating temperature range (-65°C to 175°C) and ROHS3 compliance certification. This part is suitable for applications requiring enhanced thermal performance margins.

1N4001GP-E3/54 and 1N4001GP-E3/73 (Vishay General Semiconductor) offer extended temperature range (-65°C to 175°C) and ROHS3 compliance. These parts feature improved forward voltage characteristics (1.1 V maximum) compared to the original specification (1.3 V maximum), providing reduced power dissipation in rectification circuits.

1N4001G (Taiwan Semiconductor Corporation) is an active part with the lowest forward voltage specification (1.0 V maximum at 1 A) among available substitutes, offering superior efficiency in power conversion applications while maintaining full electrical compatibility.

Parts Not Recommended for New Designs:

1N4001-TP (Micro Commercial Co) and 1N4001RLG (onsemi) carry "Not For New Designs" status and should be used only for legacy system maintenance where component-level compatibility is mandatory.

Frequently Asked Questions (FAQ)

Q: Can PR1001G-T directly replace PR1001GL-T in existing circuits?

A: Yes. PR1001G-T is the direct active equivalent with identical electrical specifications. The only differences are product status (Active vs. Obsolete) and packaging format (Tape & Reel vs. bulk). No circuit modifications are required.

Q: What is the difference between fast recovery (150 ns) and standard recovery (>500 ns) diodes?

A: Recovery time affects switching speed and reverse-bias behavior. The PR1001GL-T specifies 150 ns fast recovery. Substitute parts with standard recovery (>500 ns) such as 1N4001-E3/54 and 1N4001G are functionally compatible for general-purpose rectification but exhibit slower switching characteristics. Selection depends on circuit switching frequency requirements.

Q: Are DO-41 and DO-204AL packages mechanically interchangeable?

A: Yes. DO-41 and DO-204AL are equivalent axial through-hole package designations for the same physical form factor. Both accommodate identical lead spacing and mounting hole requirements on printed circuit boards.

Q: Why do some substitutes specify lower forward voltage (1.1 V or 1.0 V) than the original (1.3 V)?

A: Lower forward voltage specifications indicate improved semiconductor material or manufacturing processes. Parts with 1.1 V or 1.0 V forward voltage are fully compatible with circuits designed for 1.3 V maximum, as they operate within the original specification envelope while providing reduced power dissipation and heat generation.

Q: Can I use 1N4001RLG with its 10 µA reverse leakage instead of the 5 µA specification?

A: 1N4001RLG meets the 5 µA maximum requirement specified for PR1001GL-T, as 10 µA is the measured value at the specified test condition. However, this part carries "Not For New Designs" status and should be reserved for legacy system maintenance only.

Q: What is the significance of extended temperature range (-65°C to 175°C) in RGP10A-E3/54 and 1N4001GP variants?

A: Extended temperature range indicates the part maintains specified electrical characteristics across a wider operating envelope. Parts rated to 175°C provide additional thermal margin compared to the original 150°C specification, beneficial for high-ambient or high-power-dissipation applications.

Q: Are all listed substitutes ROHS3 compliant?

A: All recommended substitutes carry ROHS3 Compliant certification. Parts with undefined RoHS status (RGP10A from Fairchild Semiconductor) should be verified with the supplier before use in applications requiring RoHS compliance documentation.

Q: Which substitute offers the best overall performance for new designs?

A: Selection depends on application requirements. For general-purpose rectification with cost optimization, 1N4001G offers the lowest forward voltage (1.0 V) and active product status. For applications requiring extended temperature operation, 1N4001GP-E3/54 or RGP10A-E3/54 provide -65°C to 175°C range with ROHS3 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message