PNF10-8SLF-D Equivalent & Substitute Parts

Part Overview

The PNF10-8SLF-D is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire onto an 8 stud. This component is classified as obsolete, indicating it is no longer in active production. The substitute part PNF10-8LF-D provides functional equivalence with updated specifications and active product status, making it the appropriate selection for new designs and replacement applications.

Substiute Parts

PNF10-8SLF-D

Panduit CorpIn Stock: 1177PNF10-8SLF-D Datasheet

Current PartRFQ

PNF10-8LF-D

Panduit CorpIn Stock: 927PNF10-8LF-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between PNF10-8SLF-D and PNF10-8LF-D is valid based on the following critical parameters remaining constant across both parts:

Wire gauge specification (10-12 AWG), stud size (8 stud), termination method (crimp), insulation material (Polyamide/Nylon), contact material (copper), contact finish (tin), insulation diameter (0.225"), tongue opening (0.160"), color (yellow), and mounting configuration (free hanging in-line) are identical between the main part and substitute.

Dimensional variations exist in width and overall length, which reflect design refinements in the substitute part. The substitute incorporates a serrated termination feature and maintains ROHS3 compliance, whereas the main part is obsolete and not subject to RoHS classification.

Parameter Comparison

Engineering Selection Recommendations

For applications currently using PNF10-8SLF-D, transition to PNF10-8LF-D is appropriate due to the obsolete status of the original part. The substitute maintains functional equivalence across all critical electrical and mechanical parameters that determine connector performance: wire gauge compatibility, stud engagement, crimp termination interface, and insulation specifications.

The PNF10-8LF-D offers the advantage of active product status, ensuring continued availability and supply chain reliability. The part achieves ROHS3 compliance, meeting current regulatory requirements for new equipment designs and manufacturing environments subject to RoHS directives.

Dimensional differences (0.010" width increase and 0.130" length increase) reflect design optimization and do not affect functional compatibility in standard free-hanging in-line mounting applications. The addition of serrated termination in the substitute part enhances mechanical retention without altering electrical performance.

Frequently Asked Questions (FAQ)

Q: Can PNF10-8LF-D directly replace PNF10-8SLF-D in existing assemblies?

A: Yes. Both parts share identical wire gauge (10-12 AWG), stud size (8), termination method (crimp), insulation material, contact material, and mounting configuration. The dimensional variations are minor and do not prevent direct substitution in standard applications.

Q: What is the significance of the serrated termination feature in PNF10-8LF-D?

A: The serrated termination is a design enhancement that improves mechanical retention of the crimp connection. This feature does not alter electrical performance or compatibility with standard crimp tooling.

Q: Why is PNF10-8SLF-D listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured by Panduit Corp. PNF10-8LF-D represents the current active equivalent in the Pan-Term® product line.

Q: Are there packaging differences between these parts?

A: PNF10-8SLF-D packaging is not specified in available data. PNF10-8LF-D is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Does the length difference (0.130") affect circuit board layout?

A: The overall length increase from 0.920" to 1.050" should be evaluated against specific board layout constraints. In most free-hanging in-line applications, this difference does not create compatibility issues. Verify clearance in confined mounting spaces.

Q: Is PNF10-8LF-D compliant with current regulatory standards?

A: Yes. PNF10-8LF-D is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.