PN14-6SLF-C Equivalent & Substitute Parts

Part Overview

The PN14-6SLF-C is a blue insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 14-16 AWG wire onto a 6 stud. This component is classified as obsolete, indicating that direct procurement from the original manufacturer may be limited or unavailable. Identifying equivalent and substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this terminal type.

Substiute Parts

PN14-6SLF-C

Panduit CorpIn Stock: 916PN14-6SLF-C Datasheet

Current PartRFQ

PN14-6LF-C

Panduit CorpIn Stock: 1158PN14-6LF-C Datasheet

SimilarRFQ

52935-3

TE Connectivity AMP ConnectorsIn Stock: 3037652935-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PN14-6SLF-C is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Wire gauge: 14-16 AWG
• Stud size: 6 Stud
• Termination method: Crimp
• Insulation material: Polyamide (PA), Nylon
• Color: Blue
• Contact finish: Tin
• Mounting type: Free Hanging (In-Line)
• Tongue inside opening: 0.140" (3.56mm)
• Width - outer edges: 0.250" (6.35mm)

Allowable Variations:

• Overall length may vary within mechanical tolerance
• Contact material (Copper or Phosphor Bronze) is acceptable
• Insulation diameter tolerance ranges are permissible
• Product status (Active vs. Obsolete) does not affect electrical compatibility
• Packaging format (Bulk, Cut Tape) does not affect component function
• RoHS and REACH compliance status may differ

The substitute parts listed below satisfy all mandatory matching parameters and are therefore electrically and mechanically interchangeable with the PN14-6SLF-C.

Parameter Comparison

Engineering Selection Recommendations

PN14-6LF-C (Panduit Corp)

The PN14-6LF-C is the primary substitute for the PN14-6SLF-C. Both components are manufactured by Panduit Corp within the Pan-Term® series and share identical electrical and mechanical specifications. The PN14-6LF-C is currently in active product status with ROHS3 compliance certification. The primary difference is overall length (0.860" versus 0.750"), which represents a mechanical variation within acceptable tolerance for free-hanging in-line mounting applications. The PN14-6LF-C includes serrated termination features and is available in bulk packaging with higher inventory availability (1141 pcs).

52935-3 (TE Connectivity AMP Connectors)

The 52935-3 is a cross-manufacturer substitute from TE Connectivity AMP Connectors within the PIDG series. This component meets all mandatory electrical and mechanical parameters, including wire gauge, stud size, termination method, insulation material, color, contact finish, and mounting type. The contact material differs (Phosphor Bronze versus Copper), which is an allowable variation for this terminal category. The 52935-3 is active product status with ROHS3 compliance. Insulation diameter tolerance is broader (0.115" ~ 0.182"), which accommodates the 0.162" specification of the original part. This substitute offers significantly higher inventory availability (30272 pcs) and is packaged in cut tape format.

Both substitutes are suitable for direct replacement based on compliance certifications and product status. Selection between PN14-6LF-C and 52935-3 should be based on packaging requirements, inventory lead times, and supplier preference.

Frequently Asked Questions (FAQ)

Q: Can PN14-6LF-C be used as a direct replacement for PN14-6SLF-C?

A: Yes. Both components share identical wire gauge (14-16 AWG), stud size (6), termination method (crimp), insulation material (Polyamide/Nylon), color (blue), contact finish (tin), and mounting type (free hanging in-line). The overall length difference (0.860" versus 0.750") is a mechanical variation that does not affect electrical compatibility or functional performance in free-hanging applications.

Q: What is the difference between the Copper contact material in PN14-6LF-C and the Phosphor Bronze contact material in 52935-3?

A: Both Copper and Phosphor Bronze are acceptable contact materials for this terminal category when finished with tin plating. The contact material difference does not affect compatibility with the 6 stud connection point or the 14-16 AWG wire termination. Selection between these materials is based on supplier availability and application-specific requirements.

Q: Is the broader insulation diameter tolerance of 52935-3 (0.115" ~ 0.182") compatible with the PN14-6SLF-C specification of 0.162"?

A: Yes. The PN14-6SLF-C insulation diameter of 0.162" falls within the 52935-3 tolerance range of 0.115" ~ 0.182". This tolerance range ensures compatibility across multiple wire gauges and insulation thicknesses within the 14-16 AWG category.

Q: Does the obsolete status of PN14-6SLF-C affect the compatibility of substitute parts?

A: No. Product status (obsolete versus active) does not affect electrical or mechanical compatibility. The obsolete designation indicates limited availability from the original manufacturer, which is the primary reason for identifying substitute parts. Both PN14-6LF-C and 52935-3 are active products and provide equivalent functionality.

Q: What packaging formats are available for these substitute parts?

A: PN14-6LF-C is available in bulk packaging. 52935-3 is available in cut tape (CT) format. Packaging format does not affect component performance and should be selected based on assembly process requirements and inventory management practices.

Q: Are both substitute parts RoHS compliant?

A: PN14-6LF-C is ROHS3 compliant. 52935-3 is ROHS3 compliant. The original PN14-6SLF-C has "Not applicable" RoHS status due to its obsolete classification. Both substitutes meet current RoHS3 compliance requirements for new designs and applications.

Q: Can these terminals be used interchangeably in the same assembly?

A: Yes. All three components (PN14-6SLF-C, PN14-6LF-C, and 52935-3) are mechanically and electrically interchangeable for applications requiring a blue insulated spade terminal connector with 14-16 AWG wire capacity and 6 stud connection. The tongue inside opening (0.140") is identical across all three parts, ensuring proper fit on the stud.