PMV60EN,215 N-Channel MOSFET 30V 4.7A Equivalent & Substitute Parts

Part Overview

The PMV60EN,215 is an N-Channel MOSFET manufactured by NXP USA Inc., rated for 30V drain-to-source voltage with 4.7A continuous drain current at 25°C. The device is housed in a SOT-23 (TO-236AB) surface mount package and features a maximum on-resistance of 55mOhm at 2A, 10V gate-source voltage. This part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing production and design requirements. Substitute parts must maintain compatibility across electrical ratings, thermal characteristics, and mechanical packaging to ensure direct replacement capability.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	30	V
Continuous Drain Current (Id) @ 25°C	4.7	A
On-Resistance (Rds On) @ 2A, 10V	55	mOhm
Gate-Source Voltage (Vgs) Maximum	±20	V
Gate Threshold Voltage (Vgs(th)) @ 1mA	2	V
Power Dissipation (Max)	280	mW
Operating Temperature Range	-55 to 150	°C
Package Type	SOT-23 (TO-236AB)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the PMV60EN,215 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Drain-to-Source Voltage (Vdss): Must equal or exceed 30V
Continuous Drain Current (Id): Must equal or exceed 4.7A at 25°C
On-Resistance (Rds On): Must not exceed 55mOhm at rated current and gate voltage
Gate-Source Voltage (Vgs) Range: Must accommodate ±20V or greater
Package Type: Must be SOT-23 (TO-236AB) or equivalent 3-pin surface mount variant
Operating Temperature: Must span -55°C to 150°C minimum
FET Type: N-Channel MOSFET technology only
Compliance: RoHS3 compliant, MSL 1 (Unlimited)

Substitute parts are grouped into two categories based on current rating capability and on-resistance characteristics. Parts rated at 4A or higher with on-resistance values between 50mOhm and 80mOhm at specified gate voltages are considered direct functional equivalents. Parts with lower current ratings (2.2A to 3.8A) are listed as secondary alternatives where thermal and current-handling requirements permit derating.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs Max (V)	Package	Status
PMV60EN,215	NXP USA Inc.	30	4.7	55 @ 2A, 10V	±20	SOT-23	Obsolete
AO3402	Alpha & Omega Semiconductor	30	4	55 @ 4A, 10V	±12	SOT-23-3	Not For New Designs
AO3406	Alpha & Omega Semiconductor	30	3.6	50 @ 3.6A, 10V	±20	SOT-23-3	Not For New Designs
AO3418	Alpha & Omega Semiconductor	30	3.8	60 @ 3.8A, 10V	±12	SOT-23-3	Not For New Designs
AO3424	Alpha & Omega Semiconductor	30	3.8	80 @ 2A, 10V	±12	SOT-23-3	Not For New Designs
AO3434A	Alpha & Omega Semiconductor	30	4	52 @ 4A, 10V	±12	SOT-23-3	Not For New Designs
DMG3402L-7	Diodes Incorporated	30	4	52 @ 4A, 10V	±12	SOT-23-3	Active
DMG3418L-7	Diodes Incorporated	30	4	60 @ 4A, 10V	±12	SOT-23-3	Active
DMN3150L-7	Diodes Incorporated	28	3.8	85 @ 3.6A, 4.5V	±12	SOT-23-3	Active
DMN3200U-7	Diodes Incorporated	30	2.2	90 @ 2.2A, 4.5V	±8	SOT-23-3	Active
FDN337N	onsemi	30	2.2	65 @ 2.2A, 4.5V	±8	SOT-23-3	Active

Engineering Selection Recommendations

Primary Substitutes (Recommended for Direct Replacement):

The DMG3402L-7 (Diodes Incorporated) and AO3434A (Alpha & Omega Semiconductor) are the preferred substitutes for the PMV60EN,215. Both devices maintain 30V Vdss rating, deliver 4A continuous drain current, and feature on-resistance values of 52mOhm at 4A, 10V gate voltage. The DMG3402L-7 holds Active product status, ensuring long-term availability and supply chain stability. Both parts are housed in SOT-23-3 surface mount packages, providing mechanical compatibility with existing PCB layouts. RoHS3 compliance and MSL 1 moisture sensitivity rating are maintained across both alternatives.

Secondary Substitutes (Application-Dependent):

The AO3402 and AO3406 are suitable alternatives where application current requirements do not exceed 4A. The AO3402 delivers 4A at 55mOhm on-resistance, matching the original part's resistance specification. The AO3406 provides 3.6A at 50mOhm, offering improved on-resistance performance at the cost of reduced current capacity. Both maintain 30V Vdss and ±20V or ±12V gate voltage ratings respectively.

Lower Current Alternatives (Derating Required):

The DMN3200U-7 and FDN337N are limited to 2.2A continuous drain current and are suitable only for applications where the PMV60EN,215 operates below this current threshold. These parts feature higher on-resistance values (90mOhm and 65mOhm respectively) and reduced power dissipation ratings (650mW and 500mW). Selection of these alternatives requires thermal and electrical derating analysis.

Voltage Consideration:

The DMN3150L-7 features a 28V Vdss rating, which is 2V below the original specification. This part is acceptable only in applications where the maximum drain-to-source voltage does not exceed 28V.

Frequently Asked Questions (FAQ)

Q: Can the AO3402 directly replace the PMV60EN,215 in all applications?

A: The AO3402 is electrically compatible for applications requiring up to 4A continuous drain current. It maintains the 30V Vdss rating and 55mOhm on-resistance specification. However, the AO3402 is classified as "Not For New Designs," which may impact long-term supply availability. The DMG3402L-7 is preferred for new designs due to its Active product status.

Q: What is the significance of the on-resistance (Rds On) specification in substitution?

A: On-resistance directly determines power dissipation and thermal performance. The PMV60EN,215 specifies 55mOhm at 2A, 10V. Substitute parts with equal or lower on-resistance values at equivalent current and gate voltage conditions will produce equal or lower heat dissipation. Higher on-resistance values require thermal derating or reduced operating current.

Q: Are all substitute parts compatible with the original SOT-23 package footprint?

A: Yes. All listed substitute parts use SOT-23-3 or equivalent 3-pin surface mount packages (TO-236-3, SC-59 variants). These packages share identical pin configurations and PCB footprints, enabling direct mechanical replacement without layout modifications.

Q: Why do some substitutes have lower gate-source voltage ratings (±12V vs. ±20V)?

A: Gate-source voltage rating reflects the maximum voltage the gate terminal can withstand relative to the source. The PMV60EN,215 tolerates ±20V, while many substitutes limit this to ±12V. For applications using gate drive voltages within ±12V, this difference is not significant. Applications requiring ±20V gate voltage must select substitutes with matching or higher Vgs ratings, such as the AO3406.

Q: Can the DMN3200U-7 or FDN337N be used as substitutes?

A: These parts are suitable only for applications where continuous drain current does not exceed 2.2A. Both devices feature significantly higher on-resistance (90mOhm and 65mOhm respectively) and lower power dissipation ratings (650mW and 500mW). Use of these parts in applications designed for 4.7A operation requires complete thermal and electrical redesign.

Q: What is the difference between "Active" and "Not For New Designs" product status?

A: "Active" status indicates the manufacturer continues production and supports long-term supply. "Not For New Designs" indicates the manufacturer is phasing out the product and recommends alternatives for new applications. For ongoing production of existing designs, "Not For New Designs" parts remain available but may face supply constraints. New product development should prioritize Active status parts such as DMG3402L-7 or DMG3418L-7.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original PMV60EN,215 specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message