PMR10EZPJU6L0 Equivalent & Substitute Parts

Part Overview

The PMR10EZPJU6L0 is a 6 mOhms ±5% metal element chip resistor in 0805 (2012 Metric) package rated for 0.5W power dissipation. This component is designed for current sensing applications in automotive environments and carries AEC-Q200 qualification. The part is active in production with 672 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, design optimization, or application-specific tolerance requirements.

Substiute Parts

PMR10EZPJU6L0

Rohm SemiconductorIn Stock: 744PMR10EZPJU6L0 Datasheet

Current PartRFQ

PMR10EZPFU6L00

Rohm SemiconductorIn Stock: 21500PMR10EZPFU6L00 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PMR10EZPJU6L0 is permissible with parts maintaining identical electrical and mechanical specifications across the following critical parameters:

• Resistance value: 6 mOhms (exact match required)
• Power rating: 0.5W minimum
• Package type: 0805 (2012 Metric)
• Composition: Metal Element
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -55°C to 155°C minimum
• Automotive qualification: AEC-Q200
• Current sense application capability

Tolerance variation is permitted when the substitute part meets or exceeds the tolerance specification of the original part. The PMR10EZPFU6L00 qualifies as a direct substitute based on these criteria, with improved tolerance specification (±1% versus ±5%).

Parameter Comparison

Engineering Selection Recommendations

The PMR10EZPFU6L00 is a qualified substitute for the PMR10EZPJU6L0 in all applications where the original part is specified. Both components are manufactured by Rohm Semiconductor, carry identical AEC-Q200 automotive qualification, and maintain full compliance with ROHS3 and REACH requirements. The substitute part offers superior tolerance performance (±1% versus ±5%), making it suitable for applications requiring tighter resistance accuracy. Both parts are active in production with established supply chains. Selection between these parts should be based on tolerance requirements of the specific application and current inventory availability.

Frequently Asked Questions (FAQ)

Q: Can PMR10EZPFU6L00 be used as a direct replacement for PMR10EZPJU6L0?

A: Yes. Both parts share identical resistance value, power rating, package type, temperature coefficient, and operating temperature range. The substitute part features improved tolerance specification and maintains all automotive and compliance certifications.

Q: What is the difference between these two parts?

A: The primary difference is tolerance specification. PMR10EZPJU6L0 carries ±5% tolerance, while PMR10EZPFU6L00 carries ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts suitable for current sensing applications?

A: Yes. Both the PMR10EZPJU6L0 and PMR10EZPFU6L00 are specified for current sense applications and carry AEC-Q200 automotive qualification.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts use identical 0805 (2012 Metric) packaging with matching footprint dimensions and termination configuration, allowing direct PCB substitution without layout modifications.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant, REACH unaffected, and carry AEC-Q200 automotive qualification. Moisture sensitivity level is rated as 1 (Unlimited) for both components.