PMR03EZPJ000 Equivalent & Substitute Parts

Part Overview

The PMR03EZPJ000 is a 0 Ohms jumper chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component functions as an electrical bridge or current sense element in automotive applications. The part is actively produced and widely stocked with 27,040 units available. Substitute parts are necessary when primary inventory is depleted, when alternative packaging formats are required, or when sourcing from multiple manufacturers is mandated by procurement specifications.

Substiute Parts

PMR03EZPJ000

Rohm SemiconductorIn Stock: 27121PMR03EZPJ000 Datasheet

Current PartRFQ

CRCW06030000Z0EAHP

Vishay DaleIn Stock: 500334CRCW06030000Z0EAHP Datasheet

SimilarRFQ

CRCW06030000Z0EBHP

Vishay DaleIn Stock: 10886CRCW06030000Z0EBHP Datasheet

SimilarRFQ

RCS06030000Z0EA

Vishay DaleIn Stock: 203422RCS06030000Z0EA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PMR03EZPJ000 is determined by the following parameters:

• Resistance value: 0 Ohms (exact match required)
• Package / Case: 0603 (1608 Metric) (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Rating: AEC-Q200 (required for automotive applications)
• RoHS Status: ROHS3 Compliant (required for regulatory compliance)
• Moisture Sensitivity Level: 1 (Unlimited) (required for storage and handling)

The substitute parts listed below meet all mandatory parameters. Variations in composition (Metal Element vs. Thick Film), features (Current Sense vs. Pulse Withstanding), and physical dimensions within tolerance are acceptable substitutions. Packaging format differences (Cut Tape & Digi-Reel vs. Tape & Reel) do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts meet the core electrical and mechanical requirements for direct replacement of the PMR03EZPJ000. Selection should be based on the following criteria:

RCS06030000Z0EA is the preferred substitute. It maintains active product status, matches the packaging format of the original part, and carries identical automotive and compliance certifications. Inventory availability is substantial at 203,406 units.

CRCW06030000Z0EAHP is an acceptable substitute with active product status and Cut Tape & Digi-Reel packaging. It is suitable for applications where Vishay Dale sourcing is required or preferred.

CRCW06030000Z0EBHP is not recommended for new designs. Although it meets all electrical and mechanical parameters, this part is discontinued at DiGi Electronics and carries Tape & Reel packaging only, which may require additional handling or reel management procedures.

Frequently Asked Questions (FAQ)

Q: Can RCS06030000Z0EA replace PMR03EZPJ000 in automotive applications?

A: Yes. Both parts are rated AEC-Q200, operate across -55°C to 155°C, meet ROHS3 compliance, and are packaged in 0603 (1608 Metric) format with identical electrical specifications (0 Ohms, Jumper tolerance).

Q: What is the difference between Metal Element and Thick Film composition?

A: Composition differences do not affect substitution eligibility for 0 Ohm jumper resistors. Both compositions deliver zero resistance with identical electrical performance in this application category.

Q: Are there packaging format differences between the substitute parts?

A: Yes. PMR03EZPJ000 and RCS06030000Z0EA are supplied in Cut Tape (CT) & Digi-Reel format. CRCW06030000Z0EAHP is also available in Cut Tape & Digi-Reel format. CRCW06030000Z0EBHP is supplied only in Tape & Reel (TR) format. Packaging format does not affect electrical compatibility but may impact procurement and assembly workflows.

Q: Why is CRCW06030000Z0EBHP marked as discontinued?

A: CRCW06030000Z0EBHP is discontinued at DiGi Electronics. This status does not indicate a design flaw or compliance issue. Alternative sources may carry inventory, but new design qualification should prioritize active products.

Q: Do all substitute parts meet the same moisture sensitivity requirements?

A: Yes. All parts listed carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or shelf life.