PMPB15XPH P-Channel MOSFET 12V 8.2A Equivalent & Substitute Parts

Part Overview

The PMPB15XPH is an active P-Channel Metal Oxide Semiconductor Field Effect Transistor (MOSFET) manufactured by Nexperia USA Inc. This surface mount device is rated for 12V drain-to-source voltage with continuous drain current capability of 8.2A at 25°C. The component is packaged in a 6-UDFN Exposed Pad configuration (DFN2020MD-6) and is designed for applications requiring low on-resistance switching performance in compact form factors. Identification of equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate packaging or distribution format preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

PMPB15XPH

Nexperia USA Inc.In Stock: 2209PMPB15XPH Datasheet

Current PartRFQ

PMPB15XP,115

Nexperia USA Inc.In Stock: 2290PMPB15XP,115 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PMPB15XPH are identified based on strict electrical and mechanical parameter equivalence. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match):

• FET Type: P-Channel
• Drain to Source Voltage (Vdss): 12V
• Continuous Drain Current (Id) @ 25°C: 8.2A
• Rds On (Max) @ 8.2A, 4.5V: 19mOhm
• Gate Threshold Voltage (Vgs(th)) @ 250µA: 900mV
• Gate Charge (Qg) @ 4.5V: 100nC
• Input Capacitance (Ciss) @ 6V: 2875pF
• Power Dissipation: 1.7W (Ta), 12.5W (Tc)
• Operating Temperature Range: -55°C to 150°C

Mechanical Parameters (Must Match):

• Package Type: 6-UDFN Exposed Pad (DFN2020MD-6)
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts may differ in packaging format (Tape & Reel versus Cut Tape & Digi-Reel®) without affecting electrical or mechanical compatibility. All identified substitutes maintain identical electrical performance and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the PMPB15XPH and PMPB15XP,115 are active products manufactured by Nexperia USA Inc. and maintain full electrical and mechanical equivalence. Selection between these parts is determined by packaging and distribution format requirements rather than performance characteristics.

PMPB15XPH is supplied in Tape & Reel (TR) format, suitable for high-volume automated assembly operations where continuous reel feeding is required.

PMPB15XP,115 is supplied in Cut Tape (CT) and Digi-Reel® format, suitable for lower-volume applications, prototype development, or situations where smaller quantity increments are required.

Both parts are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, indicating compatibility with standard storage and handling procedures. Both maintain identical electrical performance across the full operating temperature range of -55°C to 150°C. Selection should be based on assembly process requirements and supply chain logistics rather than technical performance considerations.

Frequently Asked Questions (FAQ)

Q: Are PMPB15XPH and PMPB15XP,115 electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications including Vdss (12V), continuous drain current (8.2A), on-resistance (19mOhm), gate charge (100nC), and all other electrical parameters. They operate identically in circuit applications.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. PMPB15XPH is supplied in Tape & Reel (TR) format for automated high-volume assembly. PMPB15XP,115 is supplied in Cut Tape (CT) and Digi-Reel® format for lower-volume or manual assembly applications. All electrical and mechanical specifications are identical.

Q: Can I use PMPB15XP,115 in place of PMPB15XPH on a production assembly line?

A: Both parts use the identical 6-UDFN Exposed Pad (DFN2020MD-6) surface mount package. Substitution is mechanically and electrically compatible. However, Cut Tape and Digi-Reel® formats may require different feeder equipment than Tape & Reel format. Verify compatibility with your specific assembly equipment before implementation.

Q: Are there any thermal or power handling differences between these parts?

A: No. Both parts have identical power dissipation ratings of 1.7W (Ta) and 12.5W (Tc), and identical operating temperature ranges of -55°C to 150°C. Thermal performance is equivalent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both PMPB15XPH and PMPB15XP,115 are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating. Both are REACH Unaffected and classified as EAR99 for export control purposes.

Q: Which part should I specify for a new design?

A: Selection depends on your manufacturing process. For high-volume automated assembly with reel feeding capability, specify PMPB15XPH (Tape & Reel). For lower-volume production, prototype development, or manual assembly, specify PMPB15XP,115 (Cut Tape & Digi-Reel®). Both are active products with equivalent long-term availability.

Q: Is the gate charge specification identical between these parts?

A: Yes. Both parts have a maximum gate charge (Qg) of 100nC at 4.5V, resulting in identical switching speed and drive circuit requirements.