PMNF6-6R-L Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The PMNF6-6R-L is an insulated ring terminal connector manufactured by Panduit Corp, designed for 10-12 AWG wire gauges with M6 stud mounting. This circular terminal features crimp termination with serrated contact surfaces and tin-plated electrolytic copper construction. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional compatibility across critical electrical and mechanical parameters.

Substiute Parts

PMNF6-6R-L

Panduit CorpIn Stock: 746PMNF6-6R-L Datasheet

Current PartRFQ

PNF10-14R-L

Panduit CorpIn Stock: 1191PNF10-14R-L Datasheet

SimilarRFQ

130205

TE Connectivity AMP ConnectorsIn Stock: 4380130205 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PMNF6-6R-L is determined by strict alignment across the following critical parameters:

Primary Compatibility Criteria:

• Terminal Type: Circular
• Wire Gauge: 10-12 AWG
• Stud/Tab Size: M6 Stud (for direct mechanical fit)
• Termination Method: Crimp
• Insulation: Insulated
• Contact Finish: Tin
• Features: Serrated Termination

Secondary Considerations:

• Contact Material composition (Copper or Electrolytic Copper)
• Insulation material (Polyamide/Nylon variants)
• Overall dimensions within functional tolerance
• Product status (Active preferred for ongoing availability)

The substitute parts identified maintain compatibility across all primary criteria, ensuring functional equivalence in circuit applications requiring M6 stud connection with 10-12 AWG wire termination.

Parameter Comparison

Engineering Selection Recommendations

130205 (TE Connectivity AMP Connectors) - Primary Substitute

The 130205 provides direct functional equivalence to the PMNF6-6R-L across all critical parameters. Both terminals accommodate M6 stud mounting with 10-12 AWG wire gauges and feature identical crimp termination with serrated contact surfaces. The 130205 maintains active product status with RoHS compliance certification, ensuring long-term availability and regulatory alignment. Dimensional variations (length 1.331" versus 1.190", width 0.531" versus 0.430") remain within functional tolerance for standard M6 stud applications. The TE Connectivity part carries RoHS Compliant status with MSL 1 rating, suitable for standard industrial and automotive terminal applications.

PNF10-14R-L (Panduit Corp) - Conditional Substitute

The PNF10-14R-L shares identical wire gauge (10-12 AWG), termination method (crimp), and insulation characteristics with the PMNF6-6R-L. However, this part features a 1/4" stud connection rather than M6, requiring mechanical redesign of the mounting interface. This substitute applies only to applications where stud size modification is feasible. The PNF10-14R-L maintains active product status with ROHS3 compliance and REACH Unaffected designation. Selection of this alternative requires confirmation that 1/4" stud compatibility exists in the target application.

Frequently Asked Questions (FAQ)

Q: Can the 130205 directly replace the PMNF6-6R-L without circuit modification?

A: The 130205 maintains compatibility across all critical electrical parameters: 10-12 AWG wire gauge, M6 stud mounting, crimp termination, tin-plated contact finish, and serrated termination features. Direct substitution is supported for applications utilizing M6 stud connections. Dimensional differences do not affect electrical performance or mechanical fit on standard M6 studs.

Q: What is the primary difference between the 130205 and PNF10-14R-L substitutes?

A: The 130205 maintains M6 stud compatibility identical to the PMNF6-6R-L, while the PNF10-14R-L features a 1/4" stud connection. Both share identical wire gauge and termination specifications. Selection depends on the stud size requirement of the target application.

Q: Does the PMNF6-6R-L obsolescence affect the availability of substitutes?

A: No. Both identified substitutes maintain active product status. The 130205 carries 4,357 pieces in stock inventory, and the PNF10-14R-L carries 1,158 pieces, ensuring immediate availability for replacement applications.

Q: Are there compliance differences between the main part and substitutes?

A: The PMNF6-6R-L product status is listed as obsolete without specific compliance certifications. The 130205 is RoHS Compliant with MSL 1 rating. The PNF10-14R-L is ROHS3 Compliant with REACH Unaffected status. Both substitutes meet current regulatory requirements for new designs and production applications.

Q: What contact material differences exist between the PMNF6-6R-L and substitutes?

A: The PMNF6-6R-L specifies electrolytic copper contact material. Both substitutes (130205 and PNF10-14R-L) use standard copper contact material. Both are tin-plated with identical finish specifications. Contact material composition does not affect functional compatibility in standard terminal applications.

Q: Can the PNF10-14R-L be used in applications originally designed for M6 studs?

A: No. The PNF10-14R-L features 1/4" stud connection and requires mechanical redesign of the mounting interface. This substitute applies only to applications where 1/4" stud compatibility exists or can be implemented.