PMNF6-6R-2K Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The PMNF6-6R-2K is an insulated ring terminal connector manufactured by Panduit Corp, designed for 10-12 AWG wire gauges with M6 stud mounting. This circular terminal features crimp termination with serrated contact surfaces and tin-plated copper construction. The product is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional compatibility across critical electrical and mechanical parameters.

Substiute Parts

PMNF6-6R-2K

Panduit CorpIn Stock: 1224PMNF6-6R-2K Datasheet

Current PartRFQ

PNF10-14R-2K

Panduit CorpIn Stock: 7521PNF10-14R-2K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PMNF6-6R-2K is determined by compatibility across the following critical parameters:

Electrical Compatibility Parameters:

• Wire gauge range (10-12 AWG)
• Contact material and finish (Copper, Tin)
• Termination method (Crimp)
• Insulation type (Polyamide/Nylon)

Mechanical Compatibility Parameters:

• Terminal type (Circular)
• Mounting configuration (Free Hanging, In-Line)
• Thickness (0.040")
• Serrated termination feature

Functional Constraint: The primary substitution limitation is the stud size. The PMNF6-6R-2K uses an M6 stud, while substitute parts may utilize different stud configurations. Substitution is valid only when the alternative part accommodates the same wire gauge and maintains equivalent electrical performance characteristics within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

The PNF10-14R-2K serves as a functional substitute for the obsolete PMNF6-6R-2K based on the following engineering criteria:

Product Status Advantage: The PNF10-14R-2K maintains active product status with current manufacturing support, whereas the PMNF6-6R-2K is classified as obsolete. This transition ensures long-term supply chain continuity and access to current manufacturing quality standards.

Compliance and Certification: The PNF10-14R-2K carries RoHS3 compliance certification, providing enhanced environmental and regulatory alignment compared to the main part. Both parts maintain REACH Unaffected status and EAR99 export classification, ensuring consistent regulatory treatment.

Electrical and Mechanical Equivalence: The substitute part maintains identical wire gauge specification (10-12 AWG), contact material composition (Copper with Tin finish), termination methodology (Crimp), and insulation characteristics (Polyamide/Nylon). Dimensional parameters including thickness (0.040"), width (0.520"), and serrated termination features are preserved.

Stud Configuration Consideration: The primary mechanical difference is the stud size transition from M6 to 1/4 inch. This substitution is valid only when the application mounting point accommodates 1/4 inch stud configuration. The 1/4 inch stud represents a standard alternative within the Pan-Term® series for equivalent wire gauge applications.

Packaging and Availability: The PNF10-14R-2K is available in Cut Tape (CT) packaging with 7,494 pieces in current stock, compared to the obsolete main part. The Reel Smart™ series designation indicates enhanced packaging efficiency for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the PNF10-14R-2K directly replace the PMNF6-6R-2K in all applications?

A: Direct replacement is valid only when the application mounting point accepts a 1/4 inch stud configuration. The M6 stud of the original part differs from the 1/4 inch stud of the substitute. All other electrical and mechanical parameters are equivalent for 10-12 AWG wire gauge applications.

Q: What wire gauge range does the PNF10-14R-2K support?

A: The substitute part supports 10-12 AWG wire gauge, identical to the PMNF6-6R-2K specification.

Q: Are the contact materials identical between the two parts?

A: Yes. Both parts utilize copper contact material with tin finish, ensuring equivalent electrical conductivity and corrosion resistance characteristics.

Q: What is the difference in insulation material between these parts?

A: The PMNF6-6R-2K specifies Polyamide (PA66), Nylon 6/6, while the PNF10-14R-2K specifies Polyamide (PA), Nylon. Both materials are polyamide-based with equivalent insulation performance for this terminal application.

Q: Does the PNF10-14R-2K meet current regulatory requirements?

A: Yes. The PNF10-14R-2K carries RoHS3 compliance certification and maintains REACH Unaffected status, meeting current environmental and regulatory standards. The obsolete PMNF6-6R-2K does not carry RoHS3 certification.

Q: What packaging format is available for the substitute part?

A: The PNF10-14R-2K is supplied in Cut Tape (CT) packaging, suitable for both manual and automated assembly processes. The Reel Smart™ series designation indicates optimized packaging for automated handling.

Q: Are the dimensional specifications equivalent?

A: Thickness (0.040"), width (0.520"), and overall length are equivalent or comparable. The insulation diameter shows minimal variation (0.224" vs. 0.230"), which is within normal manufacturing tolerance for this terminal category.

Q: What is the termination method for both parts?

A: Both parts utilize crimp termination with serrated contact surfaces, ensuring consistent wire retention and electrical contact characteristics.