PLG.M1.0GL.LN Equivalent & Substitute Parts

Part Overview

The PLG.M1.0GL.LN is a 10-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with bulkhead rear-side nut mounting. The part is currently active in production with 832 units in stock.

Equivalent and substitute parts are identified when alternative manufacturers offer connectors with matching electrical and mechanical specifications, enabling direct replacement in applications where the original part may be unavailable, subject to extended lead times, or when design flexibility permits component sourcing from multiple qualified suppliers.

Substiute Parts

PLG.M1.0GL.LN

LEMOIn Stock: 850PLG.M1.0GL.LN Datasheet

Current PartRFQ

G11M07-P10LCC0-0080

ODUIn Stock: 1112G11M07-P10LCC0-0080 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PLG.M1.0GL.LN is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Connector type: Receptacle with female sockets
• Number of positions: 10
• Mounting configuration: Panel mount with bulkhead rear-side nut
• Termination method: Solder cup
• Fastening mechanism: Push-pull
• Shell material: Polysulfone (PSU)
• Contact finish: Gold plating on mating surfaces
• Ingress protection rating: IP50
• Insert material: Polyetheretherketone (PEEK)
• Shielding configuration: Unshielded

The substitute part G11M07-P10LCC0-0080 (ODU MEDI-SNAP®) satisfies all critical matching parameters. Variations in current rating, maximum operating temperature, and color options do not preclude substitution when the application requirements fall within the substitute part's electrical and thermal specifications.

Parameter Comparison

Engineering Selection Recommendations

PLG.M1.0GL.LN (LEMO) is the primary specification. Select this part when:

• Current requirements reach or exceed 2.75A
• Operating temperature exceeds 120°C
• Original design specification requires LEMO series components
• Inventory availability is confirmed

G11M07-P10LCC0-0080 (ODU MEDI-SNAP®) is a qualified substitute when:

• Application current does not exceed 2.75A
• Maximum operating temperature does not exceed 120°C
• Design permits use of ODU MEDI-SNAP® series connectors
• Detent lock feature provides additional mechanical retention benefit
• ODU inventory availability is confirmed

Both parts are active products with current production status and comply with EAR99 export classification. The ODU substitute carries ROHS3 compliance certification and MSL 1 moisture sensitivity rating. Selection between primary and substitute should be based on application electrical requirements, thermal environment, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can G11M07-P10LCC0-0080 directly replace PLG.M1.0GL.LN in all applications?

A: Direct replacement is possible when application current requirements do not exceed 2.75A and maximum operating temperature does not exceed 120°C. The PLG.M1.0GL.LN is rated for 3A and -50°C to 150°C. Verify your specific application parameters before substitution.

Q: What is the difference in fastening between these two connectors?

A: The PLG.M1.0GL.LN features push-pull fastening. The G11M07-P10LCC0-0080 includes both push-pull and detent lock mechanisms, providing additional mechanical retention. Both are compatible with standard push-pull mating connectors.

Q: Are the shell sizes equivalent?

A: The PLG.M1.0GL.LN specifies shell size M10. The G11M07-P10LCC0-0080 specifies shell size 1. Both connectors are 10-position receptacles with identical mechanical mounting configurations (panel mount, bulkhead rear-side nut). Verify mechanical fit in your specific panel cutout design.

Q: What are the packaging differences?

A: PLG.M1.0GL.LN packaging is not specified in available data. G11M07-P10LCC0-0080 is supplied in bulk packaging. Contact manufacturers for specific packaging requirements and quantities.

Q: Are both parts RoHS compliant?

A: The G11M07-P10LCC0-0080 carries ROHS3 compliance certification. RoHS status for PLG.M1.0GL.LN is not specified in available data. Consult LEMO documentation for RoHS compliance information.

Q: What is the moisture sensitivity level for these connectors?

A: The G11M07-P10LCC0-0080 is rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. MSL rating for PLG.M1.0GL.LN is not specified in available data.

Q: Can these connectors be used in military applications?

A: The G11M07-P10LCC0-0080 lists military applications in its specification. The PLG.M1.0GL.LN lists automotive, industrial, medical, and testing equipment applications. Verify specific military qualification requirements with manufacturers.