PLG.M0.2GL.LJ Equivalent & Substitute Parts

Part Overview

The PLG.M0.2GL.LJ is a 2-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with bulkhead rear-side nut mounting. The component operates across a temperature range of -50°C to 150°C and is rated for 10A current capacity. The connector utilizes polysulfone shell material with gold-plated mating contacts and achieves IP50 ingress protection classification. This part is currently in active production status with 896 units available in inventory.

Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements where the primary part may be unavailable or where alternative specifications better suit particular operational parameters.

Substiute Parts

PLG.M0.2GL.LJ

LEMOIn Stock: 948PLG.M0.2GL.LJ Datasheet

Current PartRFQ

G11M07-P02LPH0-0040

ODUIn Stock: 1012G11M07-P02LPH0-0040 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PLG.M0.2GL.LJ is determined by strict alignment with the following critical parameters:

Primary Compatibility Criteria:

• Connector type must be receptacle with female sockets
• Position count must equal 2
• Termination method must be solder cup
• Mounting configuration must be panel mount with bulkhead rear-side nut
• Shell material must be polysulfone (PSU)
• Contact finish must be gold-plated
• Insert material must be polyetheretherketone (PEEK)
• Ingress protection rating must be IP50 or equivalent
• Fastening mechanism must be push-pull compatible

Secondary Compatibility Parameters:

• Operating temperature range must encompass or match the specified range
• Current rating must meet or exceed 10A
• Shielding configuration must be unshielded
• Primary material classification must be plastic or metal

The substitute part G11M07-P02LPH0-0040 from ODU meets these criteria with documented equivalence in connector architecture, electrical performance, and environmental specifications.

Parameter Comparison

Engineering Selection Recommendations

PLG.M0.2GL.LJ (LEMO) - Primary Selection: Select this part when the full operating temperature range of -50°C to 150°C is required for the application. This connector is in active production status with established supply availability (896 units in stock). The part carries UL94 V-0 material flammability rating and is classified under ECCN EAR99 with HTSUS code 8536.69.4020.

G11M07-P02LPH0-0040 (ODU) - Substitute Selection: This part is suitable as an equivalent when the operating temperature requirement does not exceed 120°C. The substitute provides enhanced current capacity (14A versus 10A) and includes detent lock fastening in addition to push-pull functionality. The part is ROHS3 compliant with MSL rating of 1 (Unlimited) and REACH unaffected status. Both parts share identical connector architecture, mounting configuration, and termination method, supporting direct functional substitution within the specified temperature constraint.

Selection Criteria:

• Use PLG.M0.2GL.LJ for applications requiring operation above 120°C
• Use G11M07-P02LPH0-0040 for applications with maximum operating temperature of 120°C or below
• Both parts are suitable for industrial, medical, and testing equipment applications
• Verify mechanical fit and PCB layout compatibility prior to implementation

Frequently Asked Questions (FAQ)

Q: Can G11M07-P02LPH0-0040 be used as a direct replacement for PLG.M0.2GL.LJ?

A: The G11M07-P02LPH0-0040 is functionally equivalent for applications where the maximum operating temperature does not exceed 120°C. Both connectors share identical 2-position configuration, solder cup termination, panel mount bulkhead mounting, polysulfone shell material, gold-plated contacts, and IP50 ingress protection. The substitute part provides higher current capacity (14A) and includes detent lock fastening. Applications requiring sustained operation above 120°C must use the PLG.M0.2GL.LJ.

Q: What are the key differences between these two connectors?

A: The primary differences are: (1) Operating temperature upper limit: PLG.M0.2GL.LJ operates to 150°C while G11M07-P02LPH0-0040 operates to 120°C; (2) Current rating: G11M07-P02LPH0-0040 is rated for 14A versus 10A for PLG.M0.2GL.LJ; (3) Fastening mechanism: G11M07-P02LPH0-0040 includes detent lock in addition to push-pull; (4) Compliance certifications: G11M07-P02LPH0-0040 carries ROHS3 compliance and MSL rating documentation. All other electrical and mechanical parameters are equivalent.

Q: Are the solder cup terminations compatible between these parts?

A: Yes. Both connectors utilize solder cup termination with identical mounting configuration. The solder cup interface is mechanically and electrically compatible, allowing PCB layout and assembly procedures to remain unchanged during substitution.

Q: What is the packaging difference between these parts?

A: PLG.M0.2GL.LJ is supplied with packaging designation listed as dash (-), indicating standard LEMO packaging. G11M07-P02LPH0-0040 is supplied in bulk packaging. Verify packaging requirements with procurement specifications prior to ordering.

Q: Can these connectors be used interchangeably in automotive applications?

A: Both connectors are specified for automotive applications. Substitution is permissible provided the application operating temperature does not exceed 120°C. Verify compliance with specific automotive standards and qualification requirements applicable to the end application.

Q: What compliance certifications apply to each part?

A: PLG.M0.2GL.LJ carries UL94 V-0 material flammability rating. G11M07-P02LPH0-0040 is ROHS3 compliant with MSL rating of 1 (Unlimited) and REACH unaffected status. Both parts are classified under ECCN EAR99 and HTSUS code 8536.69.4020. Verify all applicable compliance requirements for the specific end application and regulatory jurisdiction.