LEMO PLG.M0.2GL.LG Circular Connector - Equivalent & Substitute Parts

Part Overview

The LEMO PLG.M0.2GL.LG is a 2-position circular connector receptacle with female sockets, designed for panel mount applications requiring solder cup termination. This connector is actively manufactured and maintains full RoHS3 compliance. Substitute parts are identified to provide alternative sourcing options where inventory, lead time, or application-specific requirements necessitate component alternatives while maintaining electrical and mechanical compatibility.

Substiute Parts

PLG.M0.2GL.LG

LEMOIn Stock: 990PLG.M0.2GL.LG Datasheet

Current PartRFQ

G11M07-P02LPH0-0070

ODUIn Stock: 1209G11M07-P02LPH0-0070 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PLG.M0.2GL.LG is determined by strict alignment of the following critical parameters:

• Connector type (Receptacle, Female Sockets)
• Number of positions (2)
• Mounting configuration (Panel Mount, Bulkhead - Rear Side Nut)
• Termination method (Solder Cup)
• Fastening mechanism (Push-Pull, Detent Lock)
• Shell material (Polysulfone PSU)
• Contact finish (Gold)
• Ingress protection rating (IP50)
• Insert material (PEEK)
• Regulatory compliance (RoHS3)

The ODU G11M07-P02LPH0-0070 satisfies all substitution criteria. Variations in current rating (14A vs. 10A), operating temperature range (-50°C ~ 120°C vs. -50°C ~ 150°C), and contact material (Brass vs. unspecified) represent acceptable parameter differences within the scope of equivalent functionality for this connector category.

Parameter Comparison

Engineering Selection Recommendations

Both the LEMO PLG.M0.2GL.LG and ODU G11M07-P02LPH0-0070 maintain active product status and full RoHS3 compliance. The ODU substitute provides higher current capacity (14A) and is certified for military applications in addition to industrial and medical use cases. Selection between these parts should be based on application-specific current requirements, operating temperature constraints, and supply chain availability. The LEMO part supports extended temperature operation to 150°C, while the ODU part operates to 120°C maximum.

Frequently Asked Questions (FAQ)

Q: Can the ODU G11M07-P02LPH0-0070 be used as a direct replacement for the LEMO PLG.M0.2GL.LG?

A: Yes, within the constraints of your application's current and temperature requirements. Both connectors share identical mechanical mounting, termination method, and electrical interface characteristics. Verify that your circuit operates within the ODU part's 14A current rating and -50°C to 120°C temperature range.

Q: What is the significance of the different shell size designations (M02 vs. 1)?

A: These represent manufacturer-specific nomenclature for equivalent physical dimensions. Both parts are designed for the same panel cutout and mounting configuration.

Q: Are there compliance differences between these two parts?

A: No. Both parts are RoHS3 compliant, REACH unaffected, and classified under the same ECCN and HTSUS codes.

Q: How do the current ratings differ, and does this affect substitution?

A: The LEMO part is rated for 10A maximum, while the ODU part is rated for 14A. The ODU part can safely handle applications designed for the LEMO part's 10A specification. If your application requires the full 14A capacity, only the ODU part is suitable.

Q: What packaging options are available?

A: The LEMO PLG.M0.2GL.LG is supplied in standard packaging. The ODU G11M07-P02LPH0-0070 is available in bulk packaging.