PLB.M0.9GL.LV Equivalent & Substitute Parts

Part Overview

The PLB.M0.9GL.LV is a 9-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with bulkhead rear side nut fastening and push-pull detent lock mechanism. The part is actively produced and maintains 799 units in current inventory stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit equivalent configurations.

Substiute Parts

PLB.M0.9GL.LV

LEMOIn Stock: 834PLB.M0.9GL.LV Datasheet

Current PartRFQ

G11MC7-P09LCC0-0050

ODUIn Stock: 822G11MC7-P09LCC0-0050 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PLB.M0.9GL.LV is determined by the following critical parameters:

• Connector type and gender (Receptacle, Female Sockets)
• Number of positions (9)
• Termination method (Solder Cup)
• Mounting configuration (Panel Mount, Bulkhead - Rear Side Nut)
• Fastening mechanism (Push-Pull, Detent Lock)
• Shell material (Polysulfone PSU)
• Contact finish (Gold)
• Ingress protection rating (IP50)
• Insert material (PEEK)
• Regulatory compliance (ROHS3, REACH Unaffected)

The substitute part G11MC7-P09LCC0-0050 from ODU meets these core substitution criteria. Both parts share identical connector type, position count, termination method, mounting features, shell material, contact finish, ingress protection, insert material, and regulatory compliance status. Variations exist in current rating, operating temperature range, and orientation designation, which must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the PLB.M0.9GL.LV and G11MC7-P09LCC0-0050 maintain active product status and full regulatory compliance under ROHS3 and REACH standards. Selection between these parts depends on application-specific electrical and thermal requirements. The PLB.M0.9GL.LV supports higher current capacity at 3A and extended operating temperature range to 150°C. The G11MC7-P09LCC0-0050 operates at 2.75A maximum current with upper temperature limit of 120°C. Both parts are suitable for industrial, medical, and testing equipment applications where the specified electrical and thermal parameters are within acceptable limits.

Frequently Asked Questions (FAQ)

Q: Can G11MC7-P09LCC0-0050 be used as a direct replacement for PLB.M0.9GL.LV?

A: Both parts share identical connector type, position count, termination method, mounting configuration, and regulatory compliance. Substitution is valid when application current requirements do not exceed 2.75A and operating temperature remains below 120°C.

Q: What are the key differences between these two connectors?

A: The primary differences are current rating (3A vs 2.75A) and maximum operating temperature (150°C vs 120°C). All other functional and mechanical parameters are equivalent.

Q: Are both parts suitable for medical applications?

A: Both PLB.M0.9GL.LV and G11MC7-P09LCC0-0050 are listed for medical applications. Both maintain ROHS3 compliance and MSL 1 rating, meeting standard medical device connector requirements.

Q: What is the significance of the shell size designation difference (M09 vs 1)?

A: Shell size designations reflect manufacturer-specific nomenclature. Both parts are 9-position circular connectors with equivalent mechanical interfaces for panel mount bulkhead applications.

Q: Do both connectors support the same solder cup termination process?

A: Both parts feature solder cup termination with identical mounting and fastening mechanisms, supporting equivalent PCB assembly and integration procedures.