PL8210 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The PL8210 is a 2-line common mode choke (CMC) designed for power line filtering applications in surface mount configurations. This component provides electromagnetic interference (EMI) suppression for dual-conductor circuits with a maximum current rating of 1.22A and DC resistance of 200mOhm. The part is currently active in production and available in high volume inventory. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific compliance requirements.

Substiute Parts

PL8210

iNRCORE, LLCIn Stock: 1001PL8210 Datasheet

Current PartRFQ

PL8210NL

iNRCORE, LLCIn Stock: 2346PL8210NL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PL8210 is determined by strict equivalence across the following critical parameters:

• Filter Type: Power Line (EMI suppression application class)
• Number of Lines: 2 (dual-conductor configuration)
• Current Rating (Max): 1.22A (thermal and saturation performance)
• DC Resistance (DCR) (Max): 200mOhm (insertion loss and power dissipation)
• Operating Temperature Range: -55°C ~ 130°C (thermal operating envelope)
• Mounting Type: Surface Mount (assembly compatibility)
• Package / Case: Horizontal, 4 PC Pad (footprint and land pattern)
• Size / Dimension: 0.500" L x 0.500" W (12.70mm x 12.70mm) (PCB layout compatibility)
• Height (Max): 0.215" (5.46mm) (clearance and stacking constraints)

The substitute part PL8210NL meets all electrical and mechanical parameters required for direct substitution in applications designed for the PL8210.

Parameter Comparison

Engineering Selection Recommendations

PL8210: Select this part number for applications where RoHS non-compliance is acceptable or required by legacy system specifications. Product status is active with 924 units in stock.

PL8210NL: Select this part number for new designs and applications requiring RoHS3 compliance and REACH regulatory alignment. This variant maintains identical electrical and mechanical specifications while meeting modern environmental and regulatory standards. Product status is active with 2288 units in stock, providing superior supply availability.

Both part numbers are functionally equivalent for power line common mode choke applications within the specified electrical and thermal operating parameters.

Frequently Asked Questions (FAQ)

Q: Can PL8210NL be used as a direct replacement for PL8210?

A: Yes. The PL8210NL is electrically and mechanically equivalent to the PL8210. All critical parameters—current rating, DC resistance, operating temperature range, mounting type, and physical dimensions—are identical. The primary difference is regulatory compliance status (RoHS3 and REACH).

Q: What is the difference between PL8210 and PL8210NL?

A: The electrical and mechanical specifications are identical. The PL8210NL is RoHS3 compliant and REACH unaffected, while the PL8210 is RoHS non-compliant. Selection depends on regulatory requirements for your application.

Q: Are the footprints and land patterns identical?

A: Yes. Both parts use the same package configuration: Horizontal, 4 PC Pad with dimensions of 0.500" L x 0.500" W (12.70mm x 12.70mm) and maximum height of 0.215" (5.46mm). PCB layouts are fully compatible.

Q: What is the current handling capacity?

A: Both PL8210 and PL8210NL are rated for a maximum current of 1.22A with a DC resistance of 200mOhm maximum.

Q: What temperature range do these parts support?

A: Both parts operate across the temperature range of -55°C to 130°C, suitable for industrial and commercial applications.

Q: Which part should I specify for new designs?

A: For new designs, specify PL8210NL to ensure compliance with current RoHS3 and REACH regulatory requirements. Both parts are active and in production.