PKM7213APIPHS DC DC Converter 12V 150W Equivalent & Substitute Parts

Part Overview

The PKM7213APIPHS is an isolated module DC DC converter manufactured by Flex Power Modules, designed for applications requiring 12V 150W power conversion from a wide input voltage range of 66V to 160V. This Quarter Brick format converter is actively produced and widely deployed in ITE (Commercial) and Railway applications. The part is ROHS3 compliant and meets international safety standards including CB, CSA, EN, IEC, TUV, and UL certifications per standards 50155 and 62368-1.

Identifying equivalent and substitute parts is necessary when managing supply chain continuity, optimizing inventory levels, or addressing component availability constraints while maintaining identical electrical and mechanical performance specifications.

Substiute Parts

PKM7213APIPHS

Flex Power ModulesIn Stock: 1031PKM7213APIPHS Datasheet

Current PartRFQ

PKM7213APIPLHS

Flex Power ModulesIn Stock: 1034PKM7213APIPLHS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PKM7213APIPHS are identified based on strict electrical and mechanical parameter matching within the PKM 7000A (150W) series. The substitution logic is based on the following critical parameters that must remain identical:

• Input voltage range: 66V - 160V
• Output voltage: 12V
• Maximum output current: 12.5A
• Power rating: 150W
• Isolation voltage: 3 kV
• Operating temperature range: -40°C ~ 115°C
• Package format: Quarter Brick
• Mounting configuration: Through Hole
• Physical dimensions: 2.28" L x 1.45" W x 1.29" H
• Control features: Enable, Active High
• Compliance certifications: CB, CSA, EN, IEC, TUV, UL

Parts meeting all these parameters are classified as direct parametric equivalents and may be substituted without circuit redesign or thermal management modifications.

Parameter Comparison

Engineering Selection Recommendations

The PKM7213APIPLHS is a direct parametric equivalent to the PKM7213APIPHS. Both parts are manufactured by Flex Power Modules within the same PKM 7000A (150W) series and share identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection between these parts should be based on:

• Inventory availability: PKM7213APIPHS has 976 units in stock; PKM7213APIPLHS has 927 units in stock
• Supply chain continuity: Either part may be selected without design modification
• Compliance requirements: Both parts meet CB, CSA, EN, IEC, TUV, and UL certifications per standards 50155 and 62368-1
• Environmental compliance: Both parts are ROHS3 compliant and REACH unaffected

No thermal, electrical, or mechanical redesign is required when substituting between these parts. PCB layout, thermal management, and control circuitry remain unchanged.

Frequently Asked Questions (FAQ)

Q: Can PKM7213APIPLHS be used as a direct replacement for PKM7213APIPHS?

A: Yes. Both parts are parametric equivalents with identical input voltage range (66V - 160V), output voltage (12V), output current (12.5A), power rating (150W), isolation voltage (3 kV), operating temperature range (-40°C ~ 115°C), efficiency (89%), Quarter Brick package format, and Through Hole mounting configuration. No circuit modifications are required.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both PKM7213APIPHS and PKM7213APIPLHS have identical dimensions of 2.28" L x 1.45" W x 1.29" H (57.9mm x 36.8mm x 32.7mm), ensuring identical PCB footprint and thermal interface compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts carry identical certifications: CB, CSA, EN, IEC, TUV, and UL, and comply with standards 50155 and 62368-1. Both are ROHS3 compliant and REACH unaffected.

Q: What is the difference between PKM7213APIPHS and PKM7213APIPLHS?

A: Based on provided specifications, both parts are electrically and mechanically identical. The part number suffix variation (APIPHS vs. APIPLHS) may indicate internal design revision or manufacturing process differences not reflected in the electrical or mechanical parameters.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. Since all electrical parameters, mechanical dimensions, mounting type, and compliance certifications are identical, these parts are fully interchangeable without design revision, PCB layout changes, or thermal management modifications.

Q: What applications are these converters suitable for?

A: Both parts are specified for ITE (Commercial) and Railway applications, with operating temperature range of -40°C ~ 115°C (with derating) and compliance with railway standard 50155.