PJRAS1X3U01 Equivalent & Substitute Parts

Part Overview

The PJRAS1X3U01 is a barrel connector manufactured by Switchcraft Inc., classified as an RCA Jack Mono connector. This component features a 3.20mm ID and 9.00mm OD configuration, designed for solder termination in audio and signal applications. The part is currently in stock with 707 units available as new original inventory.

Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, production scheduling requirements, or when sourcing from alternative inventory channels while maintaining electrical and mechanical compatibility.

Substiute Parts

PJRAS1X3U01

Switchcraft Inc.In Stock: 734PJRAS1X3U01 Datasheet

Current PartRFQ

PJRAS1X3U01X

Switchcraft Inc.In Stock: 988PJRAS1X3U01X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PJRAS1X3U01 is determined by strict equivalence across the following critical parameters:

• Connector Type: RCA Jack Mono (Phono) configuration
• Inner Diameter (ID): 3.20mm
• Outer Diameter (OD): 9.00mm
• Termination Method: Solder
• Orientation: Right Angle (R/A)
• Manufacturer Series: PJR (Switchcraft Inc.)

Only parts meeting all of these specifications are classified as direct substitutes. Variations in any of these parameters result in incompatibility with the original design requirements.

Parameter Comparison

Engineering Selection Recommendations

The PJRAS1X3U01X qualifies as a direct substitute for the PJRAS1X3U01 based on complete parameter equivalence. Both parts are manufactured by Switchcraft Inc. within the PJR series and maintain identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain logistics, as both components are new original stock from the same manufacturer.

Frequently Asked Questions (FAQ)

Q: What makes PJRAS1X3U01X a valid substitute for PJRAS1X3U01?

A: The PJRAS1X3U01X maintains identical specifications across all critical parameters: connector type (RCA Jack Mono), inner diameter (3.20mm), outer diameter (9.00mm), termination method (solder), orientation (right angle), and manufacturer series (PJR). These parameters define functional and mechanical compatibility.

Q: Are there any differences between these parts?

A: The parts are electrically and mechanically equivalent. The only difference is the part number suffix and current inventory levels (913 units for PJRAS1X3U01X versus 707 units for PJRAS1X3U01).

Q: Can these parts be used interchangeably in production?

A: Yes. Both parts meet identical specifications and are suitable for direct substitution in applications requiring RCA Jack Mono connectors with 3.20mm ID and 9.00mm OD solder termination.

Q: What parameters must remain constant for substitution?

A: Connector type, inner diameter, outer diameter, termination method, orientation, and manufacturer series must all remain constant. Variation in any of these parameters indicates incompatibility.